IDES Prospector Already have an account? Login Here

IDES

VALOX* 364 Resin

Polybutylene Terephthalate

Supplied by SABIC Innovative Plastics

The technical datasheet with complete property values for VALOX* 364 Resin is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Designed for outdoor telecommunications enclosure applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Uses 
  • Outdoor Applications
  • Telecommunications
  
Processing Method 
  • Injection Molding
Multi-Point Data 
  • Coefficient of Thermal Expansion vs. Temperature (ASTM E831)
  • Flexural DMA (ASTM D4065)
  • Pressure-Volume-Temperature (PVT - Zoller Method)
  • Shear DMA (ASTM D4065)
  • Tensile Creep (ASTM D2990)
  • Tensile Fatigue
  • Tensile Stress vs. Strain (ASTM D638)
  • Thermal Conductivity vs. Temperature (ASTM E1530)
  • Viscosity vs. Shear Rate (ASTM D3835)
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Molding Shrinkage     Internal Method
Flow: 0.126 in
in/in
  
Across Flow: 0.126 in
in/in
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2     ASTM D638
Yield
psi
  
Break
psi
  
Tensile Elongation 2     ASTM D638
Yield
%
  
Break
%
  
Flexural Modulus 3 (1.97 in Span)
psi
 ASTM D790
Flexural Strength 3 (Yield, 1.97 in Span)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact     ASTM D256
-40°F
ft·lb/in
  
-4°F
ft·lb/in
  
73°F
ft·lb/in
  
Instrumented Dart Impact     ASTM D3763
-40°F, Total Energy
in·lb
  
-4°F, Total Energy
in·lb
  
73°F, Total Energy
in·lb
  
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load     ASTM D648
66 psi, Unannealed, 0.126 in
°F
  
264 psi, Unannealed, 0.126 in
°F
  
Electrical
Nominal Value
Unit
Test Method
Arc Resistance (PLC) 4
 
 ASTM D495
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL     UL 94
0.0580 in
 
  
0.118 in
 
  
Oxygen Index
%
 ASTM D2863
UL
Nominal Value
Unit
Test Method
RTI Str
°F
 UL 746
RTI Imp
°F
 UL 746
RTI Elec
°F
 UL 746
Comparative Tracking Index (CTI) (PLC)
 
 UL 746
High Voltage Arc Tracking Rate (HVTR) (PLC)
 
 UL 746
Hot-wire Ignition (HWI) (PLC)
 
 UL 746
High Amp Arc Ignition (HAI) (PLC)
 
 UL 746
Outdoor Suitability
 
 UL 746C
Related Terminology
This supplier and product may also be known by these terms: GE Plastics, LNP Engineering Plastics, GE Polymerland

Product names can be difficult to match. You may have searched any one of these terms to find this product: VALOX* 364 Resin, VALOX 364 Resin, VALOX* , VALOX, VALOX364Resin, 364 Resin, 364Resin, Polybutylene Terephthalate, PBT, Polyester, SABIC IP, PolybutyleneTerephthalate, Resin364
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Drying Time, Maximum
hr
  
Suggested Max Moisture
%
  
Suggested Shot Size
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Back Pressure
psi
  
Screw Speed
rpm
  
Vent Depth
in
  
Notes
1Typical properties: these are not to be construed as specifications.
2Type I, 2.0 in/min
30.051 in/min
4Tungsten Electrode
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.