IDES Prospector Already have an account? Login Here

IDES

Chisso Polypro K7019H

Polypropylene

Supplied by Chisso America Inc.

The technical datasheet with complete property values for Chisso Polypro K7019H is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Good Heat Aging Resistance
  • Good Impact Resistance
  
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Water Absorption (24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield)
psi
 ASTM D638
Tensile Elongation 2 (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
 ASTM D648
CLTE - Flow (-4 to 158°F)
in/in/°F
 ASTM D696
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
 ASTM D257
Dielectric Strength (0.0394 in)
V/mil
 ASTM D149
Dielectric Constant (1 kHz)
 
 ASTM D150
Dissipation Factor (1 kHz)
 
 ASTM D150
Arc Resistance
sec
 ASTM D495
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0413 in)
 
 UL 94
UL
Nominal Value
Unit
Test Method
RTI Elec
°F
 UL 746
Optical
Nominal Value
Unit
Test Method
Gardner Gloss (60°)
 
 ASTM D523
Additional Information
Mold Shrinkage, Chisso Method, 2-3 mm: 1.4 to 1.8 %
Duport Impact Strength, ASTM D785, -4°F, 2mm: 17.5 J
Izod Impact Strength, ASTM D256, Notched, 73°F: 11.5 kJ/m²
Injection Temperature, JIS K6758: 200 to 280°C
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Chisso Polypro K7019H, Chisso Polypro , ChissoPolyproK7019H, ChissoPolypro, PolyproK 7019 H, PolyproK7019H, PolyproK7019, Polypro, K 7019 H, K7019H, K7019, 7019H, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, Chisso, PolypropyleneUnspecified, PPUnspecified, 7019K, 7019PolyproK
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: Good Impact Resistance, Good Heat Aging Resistance.
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.