IDES Prospector Already have an account? Login Here

IDES

Chisso Polypro HF1080

Polypropylene

Supplied by Chisso America Inc.

The technical datasheet with complete property values for Chisso Polypro HF1080 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Good Stiffness
Forms 
  • Pellets
Processing Method 
  • Tenter Process
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield)
psi
 ASTM D638
Tensile Elongation 2 (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Coefficient of Friction
 
 ASTM D1894
Films
Nominal Value
Unit
Test Method
Secant Modulus - MD 2
psi
 ASTM D882
Tensile Strength - MD (Break)
psi
 ASTM D882
Tensile Elongation - MD (Break)
%
 ASTM D882
Elmendorf Tear Strength - MD
g
 ASTM D1922
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
 ASTM D648
Vicat Softening Temperature
°F
 ASTM D1525
Optical
Nominal Value
Unit
Test Method
Gardner Gloss (20°)
 
 ASTM D523
Haze
%
 ASTM D1003
Additional Information
Izod Impact, ASTM D256, Notched, 73°F: 4.8 kJ/m²
Puncture Impact Strength, ASTM D781, 73°F: 0.90 J
Coefficient of Friction, ASTM D1894, After One Day: 0.35
Heat Shrinkage, Chisso Method, 10 min, 120°C: 2.8 %
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Chisso Polypro HF1080, Chisso Polypro , ChissoPolyproHF1080, ChissoPolypro, PolyproHF 1080, PolyproHF1080, Polypro, HF 1080, HF1080, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, Chisso, PolypropyleneUnspecified, PPUnspecified, 1080HF, 1080PolyproHF
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: Good Stiffness.
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.