IDES Prospector Already have an account? Login Here

IDES

Chisso Polypro XF9748

Polypropylene

Supplied by Chisso America Inc.

The technical datasheet with complete property values for Chisso Polypro XF9748 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
For OPP film.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Uses 
  • Film
Appearance 
  • Clear/Transparent
Forms 
  • Pellets
Processing Method 
  • Extrusion Coating
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield)
psi
 ASTM D638
Tensile Elongation 2 (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Films
Nominal Value
Unit
Test Method
Water Vapor Transmission
g/100 in²/24 hr
 ASTM E96
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
 ASTM D648
Vicat Softening Temperature
°F
 ASTM D1525
Optical
Nominal Value
Unit
Test Method
Haze
%
 ASTM D1003
Additional Information
Izod Impact, ASTM D256, Notched: 4.4 kJ/m²
Oxygen Transmission, ASTM D1434, 73°F: 1.2E-6 nmol/m²s/100kps
Heat Seal Strength, Chisso Method, 1 sec, 9.8 MPa, 150°C: 1.0 N/15mm
Hot Tack Strength, Chisso Method, 2 sec, 19.6 MPa, 145°C: 12 mm
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Chisso Polypro XF9748, Chisso Polypro , ChissoPolyproXF9748, ChissoPolypro, PolyproXF 9748, PolyproXF9748, Polypro, XF 9748, XF9748, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, Chisso, PolypropyleneUnspecified, PPUnspecified, 9748XF, 9748PolyproXF
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.