|
Specific Gravity
|
|
|
ASTM D792 |
|
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
|
|
g/10 min
|
ASTM D1238 |
|
Water Absorption (24 hr)
|
|
%
|
ASTM D570 |
|
Tensile Strength 2 (Yield)
|
|
psi
|
ASTM D638 |
|
Tensile Elongation 2 (Break)
|
|
%
|
ASTM D638 |
|
Flexural Modulus
|
|
psi
|
ASTM D790 |
|
Rockwell Hardness (R-Scale)
|
|
|
ASTM D785 |
|
Deflection Temperature Under Load (66 psi, Unannealed)
|
|
°F
|
ASTM D648 |
|
Vicat Softening Temperature
|
|
°F
|
ASTM D1525 |
|
CLTE - Flow (-4 to 158°F)
|
|
in/in/°F
|
ASTM D696 |
|
Volume Resistivity
|
|
ohm·cm
|
ASTM D257 |
|
Dielectric Strength (0.0394 in)
|
|
V/mil
|
ASTM D149 |
|
Dielectric Constant (1 kHz)
|
|
|
ASTM D150 |
|
Dissipation Factor (1 kHz)
|
|
|
ASTM D150 |
|
Arc Resistance
|
|
sec
|
ASTM D495 |
|
Flame Rating - UL (0.0461 in)
|
|
|
UL 94 |
|
RTI Elec
|
|
°F
|
UL 746 |
|
Gardner Gloss (60°)
|
|
|
ASTM D523 |
|
Mold Shrinkage, Chisso Method, 2-3 mm: 1.4 to 1.8 %
Izod Impact Strength, ASTM D256, Notched, 73°F: 8.5 kJ/m²
Duport Impact Strength, ASTM D785, 2mm, -4°F: 6 J
Injection Temperature, JIS K6758: 190 to 280°C
|
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: HCPP K5108H, HCPP , HCPPK5108H, K 5108 H, K5108H, K5108, 5108H, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, Chisso, PolypropyleneUnspecified, PPUnspecified, 5108K
|
|
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
|
|
Features may also be described by the following terms: Good Impact Resistance, Good Heat Aging Resistance, High Melt Stability, Good Stiffness, Good Processability, Easy Processing, Good Creep Resistance, Creep Resistant.
|
|
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
|