IDES Prospector Already have an account? Login Here

IDES

K-Bin Rigid PVC KB-5020

Polyvinyl Chloride

Supplied by K-Bin, Inc.

The technical datasheet with complete property values for K-Bin Rigid PVC KB-5020 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Interior rigid PVC general purpose compound with excellent toughness. Good dimensional stability, can be used in thin wall and thick wall applications. Same as KB 5019, but a little higher gloss level. Can provide trouble-free extended runs without loss of color or degradation.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • General Purpose
  • Good Dimensional Stability
  • Good Toughness
Uses 
  • Thick-walled Parts
  • Thin-walled Parts
  
Agency Ratings 
 
Appearance 
  • Colors Available
  • Natural Color
  
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ASTM D638
Tensile Strength (Yield)
psi
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Flexural Strength
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (0.125 in)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
 
 UL 94
Additional Information
Gardner Impact, 14lb impact weight on profile of 0.125", ASTM D-4226, Method "A": >3.23 (in-lbs/mil)
Gardner Impact, 14lb impact weight on profile of 0.125", ASTM D-4226, Method "B": >5.71 (in-lbs/mil)
Specific Gravity, ASTM D792, colors: 1.38
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: K-Bin Rigid PVC KB-5020, KBin Rigid PVC KB5020, K-Bin Rigid PVC , KBin Rigid PVC, K:Bin Rigid PVC, K/Bin Rigid PVC, K+Bin Rigid PVC, K_Bin Rigid PVC, K Bin Rigid PVC, KBinRigidPVCKB5020, KBinRigidPVC, K_BinRigidPVC, KB, PVCKB-5020, PVCKB5020, PVCKB:5020, PVCKB/5020, PVCKB+5020, PVCKB_5020, PVCKB 5020, PVCKB, KB-5020, KB5020, KB:5020, KB/5020, KB+5020, KB_5020, KB 5020, Polyvinyl Chloride, Unspecified, Polyvinyl Chloride Unspecified, PVC, Unspecified, PVC Unspecified, Polyvinyl Chloride, PVC, K-Bin, PolyvinylChlorideUnspecified, PVCUnspecified, PolyvinylChloride, 5020KB, 5020PVCKB
Features
Features may also be described by the following terms: Good Toughness, Tough, Good Dimensional Stability, Dimensionally Stable.
Uses
Uses may also be described by the following terms: Thin-walled Parts, Thin Walled Parts, Thin-wall Parts, Thin wall Parts, Thinwall Parts, Thick-walled Parts, Thick Walled Parts, Thick-wall Parts, Thick Wall Parts, Thickwall Parts.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): NSF (1), UL (1).
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Die Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.