IDES Prospector Already have an account? Login Here

IDES

K-Bin Rigid PVC KB-7400

Polyvinyl Chloride

Supplied by K-Bin, Inc.

The technical datasheet with complete property values for K-Bin Rigid PVC KB-7400 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Profiles produced from this compound will have high impact and superior clarity.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • High Clarity
  • High Impact Resistance
  
Uses 
  • Profiles
Forms 
  • Pellets
Processing Method 
  • Profile Extrusion
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ASTM D638
Tensile Strength (Yield)
psi
 ASTM D638
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (0.125 in)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648
Additional Information
Gardner Impact, 14lb impact weight on profile of 0.125", ASTM D-4226, Method "A": >4.59 (in-lbs/mil)
Gardner Impact, 14lb impact weight on profile of 0.125", ASTM D-4226, Method "B": >4.59 (in-lbs/mil)
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: K-Bin Rigid PVC KB-7400, KBin Rigid PVC KB7400, K-Bin Rigid PVC , KBin Rigid PVC, K:Bin Rigid PVC, K/Bin Rigid PVC, K+Bin Rigid PVC, K_Bin Rigid PVC, K Bin Rigid PVC, KBinRigidPVCKB7400, KBinRigidPVC, K_BinRigidPVC, KB, PVCKB-7400, PVCKB7400, PVCKB:7400, PVCKB/7400, PVCKB+7400, PVCKB_7400, PVCKB 7400, PVCKB, KB-7400, KB7400, KB:7400, KB/7400, KB+7400, KB_7400, KB 7400, Polyvinyl Chloride, Unspecified, Polyvinyl Chloride Unspecified, PVC, Unspecified, PVC Unspecified, Polyvinyl Chloride, PVC, K-Bin, PolyvinylChlorideUnspecified, PVCUnspecified, PolyvinylChloride, 7400KB, 7400PVCKB
Features
Features may also be described by the following terms: High Impact Resistance, High Clarity.
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Die Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.