IDES Prospector Already have an account? Login Here

IDES

Ultrason® S 6010

Polysulfone

Supplied by BASF Corporation

The technical datasheet with complete property values for Ultrason® S 6010 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Ultrason S 6010 is a high molecular weight injection molding and extrusion grade with excellent chemical resistance (stress crack resistance) and good solubility in typical solvents (N-methylpyrrolidone, dimethlyacetamide, dicholormethane) used in the production of membranes or coatings.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Features 
  • Good Chemical Resistance
  • Good Flow
  • Good Impact Resistance
  • High Molecular Weight
  • High Viscosity
Uses 
  • Coating Applications
  • Connectors
  • Household Goods
  • Membranes
  
Agency Ratings 
 
RoHS Compliance 
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Injection Molding
  
Multi-Point Data 
  • Viscosity vs. Shear Rate (ISO 11403-2)
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
lb/in³
 ISO 1183 2
Melt volume-flow rate (360°C/10.0 kg)
in³/10min
 ISO 1133 2
Molding Shrinkage
     ISO 294-4
Across Flow
%
  
Flow
%
  
Water Absorption
      
Saturation
%
 ASTM D570, ISO 62 2
Equilibrium, 50% RH
%
 ASTM D570
Equilibrium
%
 ISO 62 2
Mechanical
Nominal Value
Unit
Test Method
Tensile modulus
psi
 ISO 527-2 2
Tensile Stress (Yield)
psi
 ISO 527-2 2
Tensile Strain (Yield)
%
 ISO 527-2 2
Impact
Nominal Value
Unit
Test Method
Charpy notched impact strength
     ISO 179/1eA 2
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Charpy impact strength
     ISO 179/1eU 2
-22°F
 
  
73°F
 
  
Notched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi)
°F
 ISO 75-2 2
CLTE - Flow
in/in/°F
 ISO 11359-2 2
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
      
0.0591 in
ohm
 ASTM D257
--
ohm
 IEC 60093 2
Volume Resistivity
      
0.0591 in
ohm·cm
 ASTM D257
--
ohm·in
 IEC 60093 2
Relative Permittivity
     IEC 60250 2
100 Hz
 
  
1 MHz
 
  
Dissipation Factor
     IEC 60250 2
100 Hz
 
  
1 MHz
 
  
Comparative tracking index
 
 IEC 60112 2
Electric strength
V/mil
 IEC 60243-1 2
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ultrason® S 6010, Ultrason S 6010, Ultrason® S , Ultrason S, UltrasonS6010, UltrasonS, S 6010, S6010, 6010, Polysulfone, PSU, BASF, 6010S
Features
Features may also be described by the following terms: Good Flow, Good Chemical Resistance, Chemical Resistant, High Viscosity, Good Impact Resistance, High Molecular Weight, High MW.
Uses
Uses may also be described by the following terms: Household Goods, Housewares.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): NSF (1), EC (1).
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Injection Rate
 
  
Notes
1Typical properties: these are not to be construed as specifications.
2Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.