Ultramid B 36 BASF Polyamide 6

Product Description

Ultramid® B36 is a polyamide 6 grade of intermediate to high viscosity that is well suited for the production of cast and blown film and monofilaments.

General

Material Status

Commercial: Active

Availability

Europe

Features

Medium-high Viscosity

Oil Resistant

Uses

Cast Film

Film

Monofilaments

Agency Ratings

RoHS Compliance

Forms

Pellets

Processing Method

Blown Film

Cast Film

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Apparent Density		g/cm³	ISO 60
Water Absorption			ISO 62
Saturation, 73°F		%
Equilibrium, 73°F, 50% RH		%
Viscosity Number (H2SO4 (Sulphuric Acid))		cm³/g	ISO 307
Thermal	Nominal Value	Unit	Test Method
Melting Temperature (DSC)		°F	ISO 3146
Additional Information
Density, ISO 1183: 1.12 to 1.15 g/cm³ Extractables, ISO 6427, chips not ground/16h: 0.6% Film Grade, BASF Method: 1 to 3 mm²/kg Moisture Content, ISO 15512: 0.06% Pellet Shape: Round Pellet Size: 2 to 2.5 mm Relative Viscosity, 1% (m/v) in 96% (m/m) sulfuric acid, ISO 307: 3.49 to 3.71
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ultramid® B 36, Ultramid B 36, Ultramid® B , Ultramid B, UltramidB36, UltramidB, B 36, B36, 36, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, BASF, Polyamide6, Nylon6, 36B
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: Medium-High Viscosity, Medium Viscosity, High Viscosity, Medium High Viscosity.
Uses
Uses may also be described by the following terms: Cast Film, Monofilaments, Monofilament.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), EU (1).

Notes

¹Typical properties: these are not to be construed as specifications.

Ultramid® B 36

Polyamide 6

Supplied by BASF Corporation