IDES Prospector Already have an account? Login Here

IDES

Daplen™ ED160T

Polypropylene

Supplied by Borealis AG

The technical datasheet with complete property values for Daplen™ ED160T is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
ED160T is a very soft elastomer modified polypropylene compound intended for injection moulding. The product is available also in black (ED160T-8229), but other colours can be provided on request.

ED160T is especially developed for soft exterior, side protection lists and thus stabilised according to UV requirement from the automotive industry.

ED160T offers excellent paintability by the use of adhesion primers, or by use of other pre-treatment.

Automotive exterior parts:
  • Soft side protection lists
Automotive interior parts:
  • Soft handles
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  • South America
Additive 
  • UV Stabilizer
Features 
  • Paintable
  • Recyclable Material
  • Soft
Uses 
  • Automotive Applications
  • Automotive Exterior Parts
  • Automotive Interior Parts
  • Handles
  
Appearance 
  • Black
  • Colors Available
  
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Molding Shrinkage
%
 ISO 294-4
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (Injection Molded)
psi
 ISO 527-2/1
Tensile Stress (Yield, Injection Molded)
psi
 ISO 527-2/50
Tensile Strain (Break, Injection Molded)
%
 ISO 527-2/50
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (-40°F)
 
 ISO 179/1eA
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D, Injection Molded)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/A50
Additional Information
The value listed as Molding Shrinkage, ISO 294-4, was tested in accordance with Borealis test methods.
Paint Adhesion, Peel Test: >20 N/15 mm
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Daplen™ ED160T, Daplen ED160T, Daplen™ , Daplen, DaplenED160T, ED 160 T, ED160T, ED160, 160T, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, Borealis, PolypropyleneUnspecified, PPUnspecified, 160ED
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Injection Notes
Screw Speed: slow to medium
Holding Pressure: 30 to 70% of the injection pressure
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.