IDES Prospector Already have an account? Login Here

IDES

Daplen™ ED086T

Polypropylene

Supplied by Borealis AG

The technical datasheet with complete property values for Daplen™ ED086T is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Daplen ED086T is an elastomer modified polypropylene compound intended for injection moulding. The product is available in various dark grey to black colours, but other colours can be provided on request.

Daplen ED086T is especially developed for bumper covers, thus stabilised according to UV requirements from the automotive industry.

Daplen ED086T offers excellent paintability by the use of adhesion primers, or by use of other pretreatment.

Automotive exterior parts:
  • Bumper covers, spoilers and grills.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  • South America
Additive 
  • UV Stabilizer
Features 
  • Paintable
  • Recyclable Material
  
Uses 
  • Automotive Applications
  • Automotive Bumper
  • Automotive Exterior Parts
Appearance 
  • Black
  • Colors Available
  • Dark Grey
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR)
     ISO 1133
230°C/2.16 kg
g/10 min
  
230°C/5.0 kg
g/10 min
  
Molding Shrinkage
%
 ISO 294-4
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (Injection Molded)
psi
 ISO 527-2/1
Tensile Stress (Yield, Injection Molded)
psi
 ISO 527-2/50
Tensile Strain
      
Yield, Injection Molded
%
 ISO 527-2/50
Break, Injection Molded
%
 ISO 527-2/100
Impact
Nominal Value
Unit
Test Method
Charpy notched impact strength (-22°F)
ft·lb/in²
 ISO 179/1eA 2
Charpy impact strength (-22°F)
 
 ISO 179/1eU 2
Notched Izod Impact Strength
     ISO 180/1A
-40°F
ft·lb/in²
  
73°F
 
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D, Injection Molded)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306/A50
Additional Information
The value listed as Molding Shrinkage, ISO 294-4, was tested in accordance with Borealis test methods.
Paint Adhesion, Peel Test: >20 N/15 mm
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Daplen™ ED086T, Daplen ED086T, Daplen™ , Daplen, DaplenED086T, ED 086 T, ED086T, ED086, 086T, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, Borealis, PolypropyleneUnspecified, PPUnspecified, 086ED
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Uses
Uses may also be described by the following terms: Automotive Bumper, Automotive Bumpers, Automotive Applications, Automotive Sector.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Injection Notes
Screw Speed: slow to medium
Holding Pressure: 50 to 70% of the injection pressure
Notes
1Typical properties: these are not to be construed as specifications.
2Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.