IDES Prospector Already have an account? Login Here

IDES

Daplen™ EA095T

Polypropylene

Supplied by Borealis AG

The technical datasheet with complete property values for Daplen™ EA095T is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Daplen EA095T is a elastomer modified polypropylene compound intended for blow moulding and extrusion of exterior parts for the automotive industry.

Coloured Daplen EA095T can be provided on request.

Applications include:
  • Blow moulded automotive exterior parts
  • Spoilers
  • Other extruded or blow moulded parts.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  • South America
Features 
  • Recyclable Material
Uses 
  • Automotive Applications
  • Automotive Exterior Parts
  
Appearance 
  • Colors Available
Forms 
  • Pellets
Processing Method 
  • Blow Molding
  • Extrusion
  
Multi-Point Data 
  • Isothermal Stress vs. Strain (ISO 11403-1)
  • Secant Modulus vs. Strain (ISO 11403-1)
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Molding Shrinkage
%
 ISO 294-4
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
      
Injection Molded
psi
 ISO 527-2/1
--
psi
 ISO 527-2 2
Tensile Stress
      
Yield, Injection Molded
psi
 ISO 527-2/50
Yield
psi
 ISO 527-2 2
Tensile Strain
      
Yield, Injection Molded
%
 ISO 527-2/50
Yield
%
 ISO 527-2 2
Nominal strain at break
%
 ISO 527-2 2
Impact
Nominal Value
Unit
Test Method
Charpy notched impact strength (-22°F)
ft·lb/in²
 ISO 179/1eA 2
Charpy impact strength (-22°F)
 
 ISO 179/1eU 2
Notched Izod Impact Strength
     ISO 180/1A
-4°F
ft·lb/in²
  
32°F
 
  
73°F
 
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D, Injection Molded)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/A50
Additional Information
The value listed as Molding Shrinkage, ISO 294-4, was tested in accordance with Borealis test methods.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Daplen™ EA095T, Daplen EA095T, Daplen™ , Daplen, DaplenEA095T, EA 095 T, EA095T, EA095, 095T, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, Borealis, PolypropyleneUnspecified, PPUnspecified, 095EA
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.