Daplen™ ED112T Borealis Polypropylene, Unspecified (Mineral Filler, 16%)

Product Description

Daplen ED112T is a mineral reinforced, elastomer modified PP compound, intended for injection moulding.

The product is available in black (Daplen ED112T-8229) but other colours can be provided on request.

In addition to having a controlled thermal expansion, Daplen ED112T provides a good impact/stiffness balance. The product is UV stabilised.

Daplen ED112T gives excellent paintability by use of adhesive primers alone, or by use of other pretreatments.

Automotive exterior:

Bumper covers, Spoilers and exterior trims.

Parts where controlled thermal expansion is needed

Painted parts

General

Material Status

Commercial: Active

Availability

Europe

North America

South America

Filler / Reinforcement

Mineral Filler, 16% Filler by Weight

Additive

UV Stabilizer

Features

Good Impact Resistance

Good Stiffness

Paintable

Recyclable Material

Uses

Automotive Applications

Automotive Bumper

Automotive Exterior Parts

Appearance

Black

Colors Available

Forms

Pellets

Processing Method

Injection Molding

Multi-Point Data

Isothermal Stress vs. Strain (ISO 11403-1)

Secant Modulus vs. Strain (ISO 11403-1)

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR)			ISO 1133
230°C/2.16 kg		g/10 min
230°C/5.0 kg		g/10 min
Molding Shrinkage		%	ISO 294-4
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus
Injection Molded		psi	ISO 527-2/1
--		psi	ISO 527-2²
Tensile Stress
Yield, Injection Molded		psi	ISO 527-2/50
Yield		psi	ISO 527-2²
Tensile Strain
Yield, Injection Molded		%	ISO 527-2/50
Yield		%	ISO 527-2²
Nominal strain at break		%	ISO 527-2²
Impact	Nominal Value	Unit	Test Method
Charpy notched impact strength (-22°F)		ft·lb/in²	ISO 179/1eA²
Charpy impact strength (-22°F)			ISO 179/1eU²
Notched Izod Impact Strength			ISO 180/1A
-40°F		ft·lb/in²
-4°F		ft·lb/in²
32°F
73°F
Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D, Injection Molded)			ISO 868
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/B
264 psi, Unannealed		°F	ISO 75-2/A
Vicat Softening Temperature		°F	ISO 306/A50
CLTE - Flow (-22 to 158°F)		in/in/°F	ISO 11359-2
Additional Information
The value listed as Molding Shrinkage, ISO 294-4, was tested in accordance with Borealis test methods. The value listed as CLTE, 11359-1, -2, was tested in accordance with Borealis test methods. Paint Adhesion, Peel Test: 20 N/15 mm
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Daplen™ ED112T, Daplen ED112T, Daplen™ , Daplen, DaplenED112T, ED 112 T, ED112T, ED112, 112T, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, Borealis, PolypropyleneUnspecified, PPUnspecified, 112ED
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: Good Stiffness, Good Impact Resistance.
Uses
Uses may also be described by the following terms: Automotive Bumper, Automotive Bumpers, Automotive Applications, Automotive Sector.

Injection	Nominal Value	Unit
Processing (Melt) Temp		°F
Mold Temperature		°F
Injection Rate
Injection Notes
Screw Speed: slow to medium Holding Pressure: 50 to 70% of the injection pressure

Notes

¹Typical properties: these are not to be construed as specifications.

²Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.

Daplen™ ED112T

Polypropylene

Mineral Filler, 16%

Supplied by Borealis AG