IDES Prospector Already have an account? Login Here

IDES

Sumikon® FM-MK804

Polyphenylene Sulfide

Supplied by Sumitomo Bakelite Co., Ltd.

The technical datasheet with complete property values for Sumikon® FM-MK804 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • North America
  
Features 
  • Good Impact Resistance
Uses 
  • Automotive Applications
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Molding Shrinkage - Flow
in/in
 ASTM D955
Water Absorption (24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ASTM D638
Tensile Strength
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus (73°F)
psi
 ASTM D790
Flexural Strength (73°F)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648
CLTE
     ASTM D696
Flow
in/in/°F
  
Transverse
in/in/°F
  
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
 ASTM D257
Dielectric Strength
V/mil
 ASTM D149
Arc Resistance
sec
 ASTM D495
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0787 in)
 
 UL 94
Additional Information
Flexural Strength, ASTM D790, -40°C: 210 MPa
Flexural Strength, ASTM D790, 150°C: 180 MPa
Flexural Strength, ASTM D790, 200°C: 180 MPa

Flexural Modulus, ASTM D790, -40°C: 12,000 MPa
Flexural Modulus, ASTM D790, 150°C: 8,000 MPa
Flexural Modulus, ASTM D790, 200°C: 5,000 MPa
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Sumikon® FM-MK804, Sumikon FMMK804, Sumikon® , Sumikon, SumikonFMMK804, FM, FM MK 804, FM-MK804, FMMK804, FM:MK804, FM/MK804, FM+MK804, FM_MK804, FM MK804, FMMK, MK804, Polyphenylene Sulfide, PPS, Sumitomo Bake, PolyphenyleneSulfide, MKFM
Features
Features may also be described by the following terms: Good Impact Resistance.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.