IDES Prospector Already have an account? Login Here

IDES

Luvotech® J-4/30/VO

Polyamide 612

Glass Fiber Reinforcement

Supplied by Techmer Lehvoss Compounds

The technical datasheet with complete property values for Luvotech® J-4/30/VO is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Molding Parameters:
The dry temperature at 16 hours is 165°F.
For 2-zone machines, the rear temperature is 510-540°F, and the front temperature is 500-530°F.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • North America
  • South America
Filler / Reinforcement 
  • Glass Fiber Reinforcement
Additive 
  • Flame Retardant
Features 
  • Flame Retardant
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Molding Shrinkage - Flow (0.125 in)
in/in
 ASTM D955
Water Absorption (24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
 ASTM D638
Tensile Strength (Break, 73°F)
psi
 ASTM D638
Tensile Elongation (Break, 73°F)
%
 ASTM D638
Flexural Modulus (73°F)
psi
 ASTM D790
Flexural Strength (Break, 73°F)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.250 in)
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0625 in)
 
 UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Luvotech® J-4/30/VO, Luvotech J430VO, Luvotech® , Luvotech, LuvotechJ430VO, J 4 30 VO, J-4/30/VO, J430VO, J-4:30:VO, J-4+30+VO, J-4-30-VO, J-4_30_VO, J-4 30 VO, J:4/30/VO, J/4/30/VO, J+4/30/VO, J_4/30/VO, J 4/30/VO, J4, 430, 30VO, J4_30_VO, J4 30 VO, J_430VO, J 430VO, Polyamide 612, Nylon 612, Polyamide, Nylon, pa612, Techmer Lehvoss, Polyamide612, Nylon612, 4J
Generic Name
Generic Name may also be described by the following terms: PA612, PA6/12.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.