IDES Prospector Already have an account? Login Here

IDES

Luvotech® J-1200/10/FD

Acrylonitrile Butadiene Styrene

Glass Fiber Reinforcement, 10%

Supplied by Techmer Lehvoss Compounds

The technical datasheet with complete property values for Luvotech® J-1200/10/FD is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Molding Parameters:
For 2-zone machines, the rear temperature is 450-520°F, and the front temperature is 420-470°F.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • North America
  • South America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 10% Filler by Weight
Agency Ratings 
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
 ASTM D638
Tensile Strength (Break, 73°F)
psi
 ASTM D638
Flexural Modulus (73°F)
psi
 ASTM D790
Flexural Strength (Break, 73°F)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.125 in)
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Luvotech® J-1200/10/FD, Luvotech J120010FD, Luvotech® , Luvotech, LuvotechJ120010FD, J 1200 10 FD, J-1200/10/FD, J120010FD, J-1200:10:FD, J-1200+10+FD, J-1200-10-FD, J-1200_10_FD, J-1200 10 FD, J:1200/10/FD, J/1200/10/FD, J+1200/10/FD, J_1200/10/FD, J 1200/10/FD, J1200, 120010, 10FD, J1200_10_FD, J1200 10 FD, J_120010FD, J 120010FD, Acrylonitrile Butadiene Styrene, ABS, Techmer Lehvoss, AcrylonitrileButadieneStyrene, 1200J
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.