IDES Prospector Already have an account? Login Here

IDES

Radici Compounds N605HS BK10

Polyamide 6

Supplied by Radici Plastics USA, Inc.

The technical datasheet with complete property values for Radici Compounds N605HS BK10 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Nylon N605HS BK10 is a nylon 6 copolymer compound formulated primarily for extrusion applications, in particular tubing and convolute tubing. It is heat stabilized to enable finished tubing to retain toughness and ductility, even after prolonged exposure to the automotive under-hood environment.
N605HS BK10 exhibits a balance of outstanding flexibility, ductility and toughness characteristics, combined with excellent abrasion resistance. Typical of nylon 6 compounds, N605HS BK10 also maintains excellent resistance to the effects of a broad range of chemicals, oils and solvents. High melt strength and broad processing latitude permit good dimension control combined with excellent production rates.
The test specimens were tested at 73°F and 50% relative humidity and contain less than 0.2% moisture as a result of being stored in a moisture proof container immediately after molding.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • Heat Stabilizer
Features 
  • Copolymer
  • Ductile
  • Fast Molding Cycle
  • Good Abrasion Resistance
  • Good Chemical Resistance
  • Good Dimensional Stability
  • Good Flexibility
  • Good Melt Strength
  • Good Thermal Stability
  • Good Toughness
  • Heat Stabilized
  • High Heat Resistance
  • Oil Resistant
  • Solvent Resistant
Uses 
  • Automotive Under the Hood
  • Tubing
  
Appearance 
  • Black
  • Colors Available
  
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Water Absorption (24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield, 73°F, 0.125 in)
psi
 ASTM D638
Tensile Elongation 2 (Break, 73°F, 0.125 in)
%
 ASTM D638
Flexural Modulus (73°F)
psi
 ASTM D790
Flexural Strength (73°F)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.125 in)
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648
Melting Temperature
°F
  
Additional Information
Izod Impact Strength, ASTM D256, notched, 0.125", 73°F: 3.0-3.5 ft-lbs/in
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Radici Compounds N605HS BK10, Radici Compounds , RadiciCompoundsN605HSBK10, RadiciCompounds, CompoundsN 605 HS BK 10, CompoundsN605HS BK10, CompoundsN605, Compounds, N 605 HS BK 10, CompoundsN605HSBK10, N605HS BK10, N605, 605HS, HSBK, BK10, N605HSBK10, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Radici USA, Polyamide6, Nylon6, 605N, 605CompoundsN
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Good Thermal Stability, High Heat Resistance, Good Toughness, Tough, Good Flexibility, Flexible, Good Abrasion Resistance, Abrasion Resistant, Good Chemical Resistance, Chemical Resistant, Good Melt Strength, Good Dimensional Stability, Dimensionally Stable, Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle.
Uses
Uses may also be described by the following terms: Tubing, Tube.
Notes
1Typical properties: these are not to be construed as specifications.
2Type I
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.