Radici Compounds N605HSL BK05 Radici USA Polyamide 6

Product Description

Nylon N605HSL BK05 is an impact modified nylon 6 compound formulated primarily for extrusion applications, in particular tubing and convolute tubing. It is heat stabilized to enable finished tubing to retain toughness and ductility, even after prolonged exposure to the automotive under-hood environment. The product also contains a lubricant system to aid in processing.
N605HSL BK05 exhibits a balance of outstanding flexibility, ductility and toughness characteristics, combined with excellent abrasion resistance. Typical of nylon 6 compounds, N605HSL BK05 also maintains excellent resistance to the effects of a broad range of chemicals, oils and solvents. High melt strength and broad processing latitude permit good dimension control combined with excellent production rates.
The test specimens were tested at 73°F and 50% relative humidity and contain less than 0.2% moisture as a result of being stored in a moisture proof container immediately after molding.

General

Material Status

Commercial: Active

Availability

North America

Additive

Heat Stabilizer

Impact Modifier

Lubricant

Features

Ductile

Fast Molding Cycle

Good Abrasion Resistance

Good Chemical Resistance

Good Dimensional Stability

Good Flexibility

Good Impact Resistance

Good Melt Strength

Good Processability

Good Thermal Stability

Good Toughness

Heat Stabilized

High Heat Resistance

Impact Modified

Lubricated

Oil Resistant

Solvent Resistant

Uses

Automotive Under the Hood

Tubing

Automotive Specifications

Appearance

Black

Colors Available

Forms

Pellets

Processing Method

Extrusion

Physical	Nominal Value	Unit	Test Method
Specific Gravity			ASTM D792
Water Absorption (24 hr)		%	ASTM D570
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength² (Yield, 73°F, 0.125 in)		psi	ASTM D638
Tensile Elongation² (Break, 73°F, 0.125 in)		%	ASTM D638
Flexural Modulus (73°F)		psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (73°F, 0.125 in)		ft·lb/in	ASTM D256
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (264 psi, Unannealed)		°F	ASTM D648
Melting Temperature		°F
Additional Information
Elongation at Break, ASTM D638, Type I, 0.125", 73°F: 175-225 %
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Radici Compounds N605HSL BK05, Radici Compounds , RadiciCompoundsN605HSLBK05, RadiciCompounds, CompoundsN 605 HSL BK 05, CompoundsN605HSL BK05, CompoundsN605, Compounds, N 605 HSL BK 05, CompoundsN605HSLBK05, N605HSL BK05, N605, 605HSL, HSLBK, BK05, N605HSLBK05, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Radici USA, Polyamide6, Nylon6, 605N, 605CompoundsN
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Good Thermal Stability, High Heat Resistance, Good Toughness, Tough, Good Flexibility, Flexible, Good Abrasion Resistance, Abrasion Resistant, Good Chemical Resistance, Chemical Resistant, Good Melt Strength, Good Dimensional Stability, Dimensionally Stable, Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle, Good Processability, Easy Processing, Good Impact Resistance.
Uses
Uses may also be described by the following terms: Tubing, Tube.
Automotive Specifications
This plastic material has approval for 2 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): FORD (1), CHRYSLER (1).

Notes

¹Typical properties: these are not to be construed as specifications.

²Type I

Radici Compounds N605HSL BK05

Polyamide 6

Supplied by Radici Plastics USA, Inc.