IDES Prospector Already have an account? Login Here

IDES

Radici Compounds N60G15HL

Polyamide 6

Supplied by Radici Plastics USA, Inc.

The technical datasheet with complete property values for Radici Compounds N60G15HL is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
This family of nylon 6 compounds, reinforced 15% by weight with glass fiber, offers significantly improved strength and rigidity especially at elevated temperatures, while maintaining good toughness.

For molded parts which may be exposed to high temperatures for prolonged periods of time, one of the heat stabilized grades should be selected. N60G15HSL contains a conventional stabilizer system, which provides excellent protection against thermal aging, but can slightly tint the natural color, normally to a greenish hue. For applications where preservation of natural color is important, especially for precision color matches, the use of N60G15HL, which incorporates an effective stabilizer system free from color effects, is recommended.

Each compound offers the high flow, easy processing and outstanding surface appearance characteristic of nylon 6 resins, and is lubricated for improved feed and mold release.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • Color Stabilizer
  • Lubricant
  
Features 
  • Good Color Stability
  • Good Mold Release
  • Good Processability
  • Good Toughness
  • High Flow
  • High Rigidity
  • Lubricated
  • Pleasing Surface Appearance
Uses 
  • General Purpose
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Molding Shrinkage - Flow (0.125 in)
in/in
 ASTM D955
Water Absorption (24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Break, 73°F, 0.125 in)
psi
 ASTM D638
Tensile Elongation (Break, 73°F, 0.125 in)
%
 ASTM D638
Flexural Modulus (73°F)
psi
 ASTM D790
Flexural Strength (73°F)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.125 in)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648
Melting Temperature
°F
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Radici Compounds N60G15HL, Radici Compounds , RadiciCompoundsN60G15HL, RadiciCompounds, CompoundsN 60 G 15 HL, CompoundsN60G15HL, CompoundsN60, Compounds, N 60 G 15 HL, N60G15HL, N60, 60G, G15, 15HL, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Radici USA, Polyamide6, Nylon6, 60N, 60CompoundsN
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: Good Mold Release, Easy Release, Good Demolding, High Rigidity, Good Toughness, Tough, High Flow, High Melt, High MFI, Good Processability, Easy Processing, Pleasing Surface Appearance, Good Color Stability.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Suggested Shot Size
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Back Pressure
psi
  
Screw Speed
rpm
  
Cushion
in
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.