Hylon N1013HL Ravago Americas Polyamide 66 (Glass Fiber Reinforcement, 13%)

General

Material Status

Commercial: Active

Availability

North America

Filler / Reinforcement

Glass Fiber Reinforcement, 13% Filler by Weight

Additive

Heat Stabilizer

Lubricant

Features

Heat Stabilized

Lubricated

RoHS Compliance

Forms

Pellets

Processing Method

Injection Molding

Physical	Dry	Conditioned	Unit	Test Method
Specific Gravity
--		--		ASTM D792
--		--	g/cm³	ISO 1183
Molding Shrinkage - Flow
--		--	in/in	ASTM D955
--		--	%	ISO 294-4
Water Absorption (24 hr)		--	%	ASTM D570
Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Strength
Yield, 73°F			psi	ASTM D638
Yield, 73°F		--	psi	ISO 527-2
Tensile Elongation
Break, 73°F			%	ASTM D638
Break, 73°F		--	%	ISO 527-2
Flexural Modulus
73°F			psi	ASTM D790
73°F		--	psi	ISO 178
Flexural Strength
73°F			psi	ASTM D790
73°F		--	psi	ISO 178
Impact	Dry	Conditioned	Unit	Test Method
Notched Izod Impact
73°F			ft·lb/in	ASTM D256
73°F		--	ft·lb/in²	ISO 180
Hardness	Dry	Conditioned	Unit	Test Method
Rockwell Hardness (M-Scale)				ASTM D785
Thermal	Dry	Conditioned	Unit	Test Method
Deflection Temperature Under Load
264 psi, Unannealed			°F	ASTM D648
264 psi, Unannealed		--	°F	ISO 75-2/A
CLTE - Flow		--	in/in/°F	ASTM D696
Electrical	Dry	Conditioned	Unit	Test Method
Volume Resistivity		--	ohm·cm	ASTM D257
Dielectric Strength²		--	V/mil	ASTM D149
Flammability	Dry	Conditioned	Unit	Test Method
Flame Rating - UL				UL 94
0.0590 in		--
0.0590 in, BK	--
0.0590 in, NC	--
0.118 in, BK	--
0.118 in, NC	--
Related Terminology
Dry	Product names can be difficult to match. You may have searched any one of these terms to find this product: Hylon® N1013HL, Hylon N1013HL, Hylon® , Hylon, HylonN1013HL, N 1013 HL, N1013HL, N1013, 1013HL, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Ravago Americas, Polyamide66, Nylon66, 1013N
Generic Name
Dry	Generic Name may also be described by the following terms: PA66.
Conditioned	Generic Name may also be described by the following terms: PA66.
Features
Dry	Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized.
Conditioned	Product names can be difficult to match. You may have searched any one of these terms to find this product: Hylon® N1013HL, Hylon N1013HL, Hylon® , Hylon, HylonN1013HL, N 1013 HL, N1013HL, N1013, 1013HL, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Ravago Americas, Polyamide66, Nylon66, 1013N

Injection	Dry	Unit
Drying Temperature		°F
Drying Time		hr
Suggested Max Moisture		%
Processing (Melt) Temp		°F
Mold Temperature		°F
Back Pressure		psi
Screw Speed		rpm

Notes

¹Typical properties: these are not to be construed as specifications.

²Method A (Short-Time)

Hylon® N1013HL

Polyamide 66

Glass Fiber Reinforcement, 13%

Supplied by Ravago Manufacturing Americas, LLC