IDES Prospector Already have an account? Login Here

IDES

MonoSol® M8534

Polyvinyl Alcohol

Supplied by MonoSol, LLC

The technical datasheet with complete property values for MonoSol® M8534 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
MonoSol M8534 is a PVOH based thermoplastic film, soluble in cold water and manufactured using MonoSol's proprietary solution cast technology.

MonoSol M8534 provides resistance to organic solvents, rapid solubility,resistance to cold-cracking, excellent heat seal characteristics, compatibility with alkaline formulations and some resistance to borates which can create insolubility. This film can be converted in a wide range of ambient conditions. This film is typically used for Agrochemical packaging, including gel, powder and granular formulations. Standard thicknesses are 38 micron (1.5 mil), 51 micron (2.0 mil) and 76 micron (3.0 mil).
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Features 
  • Biodegradable
  • Good Crack Resistance
  • Good Heat Seal
  • Solvent Resistant
  • Water Soluble
Uses 
  • Film
  • Packaging
  
Forms 
  • Film
Physical
Nominal Value
Unit
Test Method
Moisture Content 2 (73°F)
wt%
  
Solubility 3
      
Disintegration: 50°F, 1.5 mil
sec
  
Disintegration: 75°F, 1.5 mil
sec
  
Dissolution: 50°F, 1.5 mil
sec
  
Dissolution: 75°F, 1.5 mil
sec
  
Films
Nominal Value
Unit
Test Method
Film Thickness - Recommended / Available
 
  
Secant Modulus - 100%, MD
psi
 ASTM D882, ISO 527-3
Tensile Strength - MD
      
Break
psi
 ASTM D882
--
psi
 ISO 527-3
Tensile Elongation - MD (Break)
%
 ASTM D882, ISO 527-3
Dart Drop Impact (1.5 mil)
g
 ASTM D1709, DIN 53433
Elmendorf Tear Strength - MD
      
--
g
 ASTM D1922
--
lbf
 ISO 6383-2
Yield (1.5 mil)
in²/lb
 ASTM D4321
Related Terminology
This supplier and product may also be known by these terms: Mono-Sol

Product names can be difficult to match. You may have searched any one of these terms to find this product: MonoSol® M8534, MonoSol M8534, MonoSol® , MonoSol, MonoSolM8534, M 8534, M8534, Polyvinyl Alcohol, PVOH, Vinyl Alcohol, VOH, PolyvinylAlcohol, VinylAlcohol, 8534M
Features
Features may also be described by the following terms: Good Heat Seal, Good Crack Resistance, Crack Resistant.
Notes
1Typical properties: these are not to be construed as specifications.
250%RH
3Distilled Water (MSTM 205)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.