CYCOLOY* C2100 Resin SABIC IP Euro Acrylonitrile Butadiene Styrene + PC

Product Description
CYCOLOY C2100 is a flame retardant blend, specifically developed to meet the stringent requirements of mains current carrying applications. CYCOLOY C2100 combines
General
Material Status	Commercial: Active
Availability	Europe
Additive	Flame Retardant
Features	Flame Retardant
RoHS Compliance
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Volume-Flow Rate (MVR) (260°C/5.0 kg)		in³/10min	ISO 1133
Molding Shrinkage - Flow²		in/in	Internal Method
Water Absorption			ISO 62
Saturation, 73°F		%
Equilibrium, 73°F, 50% RH		%
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2/1
Tensile Stress
Yield		psi	ISO 527-2/5
Yield		psi	ISO 527-2/50
Break		psi	ISO 527-2/5
Break		psi	ISO 527-2/50
Tensile Strain
Yield		%	ISO 527-2/5, ISO 527-2/50
Break		%	ISO 527-2/5
Break		%	ISO 527-2/50
Flexural Modulus³		psi	ISO 178
Flexural Strength^3, 4		psi	ISO 178
Taber Abrasion Resistance (1000 Cycles, 1000 g, CS-17 Wheel)		mg	Internal Method
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength⁵			ISO 179/1 e A
-22°F		ft·lb/in²
73°F		ft·lb/in²
Notched Izod Impact Strength⁶			ISO 180/1A
-22°F		ft·lb/in²
73°F		ft·lb/in²
Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)			ISO 2039-2
Ball Indentation Hardness (H 358/30)		psi	ISO 2039-1
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature⁷
66 psi, Unannealed, 3.94 in Span		°F	ISO 75-2/Be
264 psi, Unannealed, 3.94 in Span		°F	ISO 75-2/Ae
Vicat Softening Temperature
--		°F	ISO 306/B50
--		°F	ISO 306/B120
Ball Pressure Test (257°F)			IEC 60695-10-2
CLTE			ISO 11359-2
Flow: -40 to 104°F		in/in/°F
Transverse: -40 to 104°F		in/in/°F
Thermal Conductivity		Btu·in/hr/ft²/°F	ISO 8302
Electrical	Nominal Value	Unit	Test Method
Surface Resistivity		ohm	IEC 60093
Volume Resistivity		ohm·cm	IEC 60093
Relative Permittivity			IEC 60250
50 Hz
60 Hz
1 MHz
Dissipation Factor			IEC 60250
50 Hz
60 Hz
1 MHz
Comparative Tracking Index		V	IEC 60112
Electric Strength			IEC 60243-1
0.0315 in, in Oil		V/mil
0.0630 in, in Oil		V/mil
0.126 in, in Oil		V/mil
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL			UL 94
0.0591 in
0.0787 in
Glow Wire Flammability Index (0.0394 in)		°F	IEC 60695-2-12
Oxygen Index		%	ISO 4589-2
UL	Nominal Value	Unit	Test Method
RTI Str		°F	UL 746
RTI Imp		°F	UL 746
RTI Elec		°F	UL 746
Related Terminology
This supplier and product may also be known by these terms: GE Plastics Europe, LNP Engineering Plastics, GE Polymerland Europe, GE Polymerland, GE Plastics, Cycloy Product names can be difficult to match. You may have searched any one of these terms to find this product: CYCOLOY* C2100 Resin, CYCOLOY C2100 Resin, CYCOLOY* , CYCOLOY, CYCOLOYC2100Resin, C 2100 Resin, C2100 Resin, C2100, 2100Resin, C2100Resin, Acrylonitrile Butadiene Styrene + PC, Acrylonitrile Butadiene Styrene PC, Acrylonitrile Butadiene Styrene : PC, Acrylonitrile Butadiene Styrene / PC, Acrylonitrile Butadiene Styrene - PC, Acrylonitrile Butadiene Styrene _ PC, Acrylonitrile Butadiene Styrene PC, ABS+PC, ABSPC, ABS:PC, ABS/PC, ABS-PC, ABS_PC, ABS PC, Acrylonitrile Butadiene Styrene, ABS, SABIC IP Euro, AcrylonitrileButadieneStyrenePC, AcrylonitrileButadieneStyrene, AcrylonitrileButadieneStyrene_PC, 2100C

Injection	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Suggested Max Moisture		%
Hopper Temperature		°F
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Nozzle Temperature		°F
Processing (Melt) Temp		°F
Mold Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

²Tensile Bar

³0.079 in/min

⁴Yield

⁵80*10*3 sp=62mm

⁶80*10*3

⁷120*10*4 mm

CYCOLOY* C2100 Resin

Acrylonitrile Butadiene Styrene + PC

Supplied by SABIC Innovative Plastics Europe