NORYL EN130 Resin SABIC IP Euro Polyphenylene Ether + PS

Product Description
NORYL EN130 is an extrusion material with a Vicat B/120 of 140 deg C according ISO 306. NORYL EN130 is a standard extrusion grade for applications where higher temperature resistance is required. NORYL EN130 is available in all colours.
General
Material Status	Commercial: Active
Availability	Europe
Features	High Heat Resistance
RoHS Compliance
Automotive Specifications
Appearance	Colors Available
Processing Method	Profile Extrusion

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Volume-Flow Rate (MVR) (280°C/5.0 kg)		in³/10min	ISO 1133
Molding Shrinkage - Flow²		in/in	Internal Method
Water Absorption			ISO 62
Saturation, 73°F		%
Equilibrium, 73°F, 50% RH		%
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2/1
Tensile Stress			ISO 527-2/50
Yield		psi
Break		psi
Tensile Strain			ISO 527-2/50
Yield		%
Break		%
Flexural Modulus³		psi	ISO 178
Flexural Strength^3, 4		psi	ISO 178
Taber Abrasion Resistance (1000 Cycles, 1000 g, CS-17 Wheel)		mg	Internal Method
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength⁵			ISO 179/1eA
-22°F		ft·lb/in²
73°F		ft·lb/in²
Notched Izod Impact Strength⁶			ISO 180/1A
-22°F		ft·lb/in²
73°F		ft·lb/in²
Hardness	Nominal Value	Unit	Test Method
Ball Indentation Hardness (H 358/30)		psi	ISO 2039-1
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature⁷
66 psi, Unannealed, 3.94 in Span		°F	ISO 75-2/Be
264 psi, Unannealed, 3.94 in Span		°F	ISO 75-2/Ae
Vicat Softening Temperature
--		°F	ISO 306/A50
--		°F	ISO 306/B50
--		°F	ISO 306/B120
Ball Pressure Test (257°F)			IEC 60695-10-2
CLTE			ISO 11359-2
Flow: 73 to 176°F		in/in/°F
Transverse: 73 to 176°F		in/in/°F
Thermal Conductivity		Btu·in/hr/ft²/°F	ISO 8302
Electrical	Nominal Value	Unit	Test Method
Surface Resistivity		ohms	IEC 60093
Volume Resistivity		ohm·cm	IEC 60093
Relative Permittivity			IEC 60250
50 Hz
60 Hz
1 MHz
Dissipation Factor			IEC 60250
50 Hz
60 Hz
1 MHz
Electric Strength (0.126 in, in Oil)		V/mil	IEC 60243-1
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL (0.0650 in, Testing by SABIC)			UL 94
Oxygen Index		%	ISO 4589-2
Related Terminology
This supplier and product may also be known by these terms: GE Plastics Europe, LNP Engineering Plastics, GE Polymerland Europe, GE Polymerland, GE Plastics Product names can be difficult to match. You may have searched any one of these terms to find this product: NORYL* EN130 Resin, NORYL EN130 Resin, NORYL* , NORYL, NORYLEN130Resin, EN 130 Resin, EN130 Resin, EN130, 130Resin, EN130Resin, Polyphenylene Ether + PS, Polyphenylene Ether PS, Polyphenylene Ether : PS, Polyphenylene Ether / PS, Polyphenylene Ether - PS, Polyphenylene Ether _ PS, Polyphenylene Ether PS, PPE+PS, PPEPS, PPE:PS, PPE/PS, PPE-PS, PPE_PS, PPE PS, Polyphenylene Ether, PPE, SABIC IP Euro, PolyphenyleneEtherPS, PolyphenyleneEther, PolyphenyleneEther_PS, 130EN
Generic Name
Generic Name may also be described by the following terms: PPO.
Features
Features may also be described by the following terms: High Heat Resistance.
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): FORD (1).

Extrusion	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Hopper Temperature		°F
Cylinder Zone 1 Temp.		°F
Cylinder Zone 2 Temp.		°F
Cylinder Zone 3 Temp.		°F
Cylinder Zone 4 Temp.		°F
Adapter Temperature		°F
Melt Temperature		°F
Die Temperature		°F
Calibration Temp, First		°F

Notes

¹Typical properties: these are not to be construed as specifications.

²Tensile Bar

³0.079 in/min

⁴Yield

⁵80*10*4 sp=62mm

⁶80*10*4

⁷120*10*4 mm

NORYL* EN130 Resin

Polyphenylene Ether + PS

Supplied by SABIC Innovative Plastics Europe