NORYL GTX GTX924 Resin SABIC IP Euro Polyphenylene Ether + PS + Nylon

Product Description
NORYL GTX 924 is an UV stabilized unfilled Noryl GTX grade with improved processability. Noryl GTX 924 is specially designed for wheeltrim applications.
General
Material Status	Commercial: Active
Availability	Europe
Additive	UV Stabilizer
Features	Good Processability
Uses	Automotive Applications
RoHS Compliance
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Volume-Flow Rate (MVR) (280°C/5.0 kg)		in³/10min	ISO 1133
Molding Shrinkage - Flow²		in/in	Internal Method
Water Absorption			ISO 62
Saturation, 73°F		%
Equilibrium, 73°F, 50% RH		%
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2/1
Tensile Stress			ISO 527-2/50
Yield		psi
Break		psi
Tensile Strain			ISO 527-2/50
Yield		%
Break		%
Flexural Modulus³		psi	ISO 178
Flexural Strength^3, 4		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength⁵ (73°F)		ft·lb/in²	ISO 179/1eA
Notched Izod Impact Strength⁶			ISO 180/1A
-40°F		ft·lb/in²
-22°F		ft·lb/in²
-4°F		ft·lb/in²
32°F		ft·lb/in²
73°F		ft·lb/in²
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature⁷ (66 psi, Unannealed, 3.94 in Span)		°F	ISO 75-2/Be
Vicat Softening Temperature
--		°F	ISO 306/A50
--		°F	ISO 306/B50
--		°F	ISO 306/B120
Ball Pressure Test (257°F)			IEC 60695-10-2
CLTE			ISO 11359-2
Flow: 73 to 140°F		in/in/°F
Transverse: 73 to 140°F		in/in/°F
Thermal Conductivity		Btu·in/hr/ft²/°F	ISO 8302
Electrical	Nominal Value	Unit	Test Method
Volume Resistivity		ohm·cm	IEC 60093
Relative Permittivity			IEC 60250
50 Hz
60 Hz
1 MHz
Dissipation Factor			IEC 60250
50 Hz
60 Hz
1 MHz
Comparative Tracking Index		V	IEC 60112
Electric Strength (0.126 in, in Oil)		V/mil	IEC 60243-1
Related Terminology
This supplier and product may also be known by these terms: GE Plastics Europe, LNP Engineering Plastics, GE Polymerland Europe, GE Polymerland, GE Plastics Product names can be difficult to match. You may have searched any one of these terms to find this product: NORYL GTX* GTX924 Resin, NORYL GTX GTX924 Resin, NORYL GTX* , NORYL GTX, NORYLGTXGTX924Resin, NORYLGTX, GTX 924 Resin, GTX924 Resin, GTX924, 924Resin, GTX924Resin, Polyphenylene Ether + PS + Nylon, Polyphenylene Ether PS Nylon, Polyphenylene Ether : PS : Nylon, Polyphenylene Ether / PS / Nylon, Polyphenylene Ether - PS - Nylon, Polyphenylene Ether _ PS _ Nylon, Polyphenylene Ether PS Nylon, PPE+PS+Nylon, PPEPSNylon, PPE:PS:Nylon, PPE/PS/Nylon, PPE-PS-Nylon, PPE_PS_Nylon, PPE PS Nylon, Polyphenylene Ether, PPE, SABIC IP Euro, PolyphenyleneEtherPSNylon, PolyphenyleneEther, PolyphenyleneEther_PS_Nylon, 924GTX
Features
Features may also be described by the following terms: Good Processability, Easy Processing.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.

Injection	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Suggested Max Moisture		%
Hopper Temperature		°F
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Nozzle Temperature		°F
Processing (Melt) Temp		°F
Mold Temperature		°F
Injection Notes
Minimum Moisture Content: 0.02 %

Notes

¹Typical properties: these are not to be construed as specifications.

²Tensile Bar

³0.079 in/min

⁴Yield

⁵80*10*4 sp=62mm

⁶80*10*4

⁷120*10*4 mm

NORYL GTX* GTX924 Resin

Polyphenylene Ether + PS + Nylon

Supplied by SABIC Innovative Plastics Europe