IDES Prospector Already have an account? Login Here

IDES

XENOY* CL101 Resin

Polycarbonate + PBT

Supplied by SABIC Innovative Plastics Europe

The technical datasheet with complete property values for XENOY* CL101 Resin is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Xenoy CL101 is an unfilled, impact modified PC/PBT blend with excellent solvent resistance and low-temperature ductility. It has a proven track record in off-line painted exterior automotive applications. ISO1043: PC+PBT-I.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Impact Modifier
Features 
  • Ductile
  • Impact Modified
  • Paintable
  • Solvent Resistant
  
Uses 
  • Automotive Exterior Parts
RoHS Compliance 
Automotive Specifications 
 
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (250°C/5.0 kg)
g/10 min
 ASTM D1238
Melt Volume-Flow Rate (MVR) (250°C/5.0 kg)
in³/10min
 ISO 1133
Molding Shrinkage 2
     Internal Method
Flow
in/in
  
Across Flow
in/in
  
Water Absorption
     ISO 62
Saturation, 73°F
%
  
Equilibrium, 73°F, 50% RH
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
      
-- 3
psi
 ASTM D638
--
psi
 ISO 527-2/1
Tensile Strength
      
Yield 4
psi
 ASTM D638
Yield
psi
 ISO 527-2/50
Break 4
psi
 ASTM D638
Break
psi
 ISO 527-2/50
Tensile Elongation
      
Yield 4
%
 ASTM D638
Yield
%
 ISO 527-2/50
Break 4
%
 ASTM D638
Break
%
 ISO 527-2/50
Flexural Modulus
      
1.97 in Span 5
psi
 ASTM D790
-- 6
psi
 ISO 178
Flexural Strength
      
-- 6, 7
psi
 ISO 178
Yield, 1.97 in Span 5
psi
 ASTM D790
Taber Abrasion Resistance (1000 Cycles, 1000 g, CS-17 Wheel)
mg
 Internal Method
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
      
-22°F 8
ft·lb/in²
 ISO 179/1eA
-22°F
ft·lb/in²
 ISO 179/2C
-4°F
ft·lb/in²
 ISO 179/2C
73°F 8
ft·lb/in²
 ISO 179/1eA
73°F
ft·lb/in²
 ISO 179/2C
Charpy Unnotched Impact Strength 8
     ISO 179/1eU
-22°F
 
  
73°F
 
  
Notched Izod Impact
      
-22°F
ft·lb/in
 ASTM D256
32°F
ft·lb/in
 ASTM D256
73°F
ft·lb/in
 ASTM D256
-40°F 9
ft·lb/in²
 ISO 180/1A
-22°F 9
ft·lb/in²
 ISO 180/1A
73°F 9
ft·lb/in²
 ISO 180/1A
Unnotched Izod Impact Strength 9
     ISO 180/1U
-22°F
 
  
73°F
 
  
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (L-Scale)
 
 ISO 2039-2
Ball Indentation Hardness (H 358/30)
psi
 ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed, 3.94 in Span 10
°F
 ISO 75-2/Be
66 psi, Unannealed, 2.52 in Span 11
°F
 ISO 75-2/Bf
264 psi, Unannealed, 0.126 in
°F
 ASTM D648
264 psi, Unannealed, 3.94 in Span 10
°F
 ISO 75-2/Ae
264 psi, Unannealed, 2.52 in Span 11
°F
 ISO 75-2/Af
Vicat Softening Temperature
      
--
°F
 ASTM D1525 12, ISO 306/B50 12
--
°F
 ISO 306/A50
--
°F
 ISO 306/B120
Ball Pressure Test (167°F)
 
 IEC 60695-10-2
CLTE
      
Flow: -40 to 104°F
in/in/°F
 ASTM E831
Flow: 73 to 176°F
in/in/°F
 ISO 11359-2
Transverse: -40 to 104°F
in/in/°F
 ASTM E831
Transverse: 73 to 176°F
in/in/°F
 ISO 11359-2
Thermal Conductivity
Btu·in/hr/ft²/°F
 ISO 8302
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 IEC 60093
Volume Resistivity
ohm·cm
 IEC 60093
Relative Permittivity
     IEC 60250
50 Hz
 
  
60 Hz
 
  
1 MHz
 
  
Dissipation Factor
     IEC 60250
50 Hz
 
  
60 Hz
 
  
1 MHz
 
  
Electric Strength
     IEC 60243-1
0.0394 in 13
V/mil
  
0.126 in, in Oil
V/mil
  
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0591 in, Testing by SABIC)
 
 UL 94
Related Terminology
This supplier and product may also be known by these terms: GE Plastics Europe, LNP Engineering Plastics, GE Polymerland Europe, GE Polymerland, GE Plastics

Product names can be difficult to match. You may have searched any one of these terms to find this product: XENOY* CL101 Resin, XENOY CL101 Resin, XENOY* , XENOY, XENOYCL101Resin, CL 101 Resin, CL101 Resin, CL101, 101Resin, CL101Resin, Polycarbonate + PBT, Polycarbonate PBT, Polycarbonate : PBT, Polycarbonate / PBT, Polycarbonate - PBT, Polycarbonate _ PBT, Polycarbonate PBT, PC+PBT, PCPBT, PC:PBT, PC/PBT, PC-PBT, PC_PBT, PC PBT, Polycarbonate, PC, SABIC IP Euro, PolycarbonatePBT, Polycarbonate_PBT, 101CL
Automotive Specifications
This plastic material has approval for 4 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): FORD (3), OPEL (1).
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Hopper Temperature
°F
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Tensile Bar
32.0 in/min
4Type I, 2.0 in/min
50.051 in/min
60.079 in/min
7Yield
880*10*4 sp=62mm
980*10*4
10120*10*4 mm
1180*10*4 mm
12Rate B (120°C/h), Loading 2 (50 N)
13Short-Time
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.