IDES Prospector Already have an account? Login Here

IDES

MAGNUM™ 3404

ABS Resin

Supplied by Styron LLC

The technical datasheet with complete property values for MAGNUM™ 3404 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
MAGNUM™ 3404 is an excellent general purpose extrusion / thermoforming resin with outstanding processability. It combines medium impact with medium-high heat performance. The mass (continuous process) ABS technology of Styron ensures an ABS resin that combines excellent processability with a stable light base colour that is ideal for self-colouring.

Applications:
  • Medium impact monosheet
  • Co-extruded sheets
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • Latin America
  
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Injection Molding
  • Sheet Extrusion
  • Thermoforming
  
Physical
Nominal Value
Unit
Test Method
Density
      
--
g/cm³
 ISO 1183/B
--
lb/in³
 ISO 1183 2
Melt Mass-Flow Rate (MFR) (220°C/10.0 kg)
g/10 min
 ISO 1133
Melt Volume-Flow Rate (MVR) (220°C/10.0 kg)
in³/10min
 ISO 1133
Molding Shrinkage - Flow
%
 ISO 294-4
Water Absorption
     ISO 62 2
Saturation
%
  
Equilibrium
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
      
0.126 in, Injection Molded
psi
 ISO 527-2
--
psi
 ISO 527-2 2
Tensile Stress
      
Yield, 0.126 in, Injection Molded
psi
 ISO 527-2/50
Yield
psi
 ISO 527-2 2
Tensile Strain (Yield, 0.126 in, Injection Molded)
%
 ISO 527-2/50
Nominal strain at break
%
 ISO 527-2 2
Flexural Modulus 3, 4 (0.126 in, Injection Molded)
psi
 ISO 178
Flexural Strength 3, 4 (0.126 in, Injection Molded)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
      
-22°F, Injection Molded
ft·lb/in²
 ISO 179/2C
-22°F, Injection Molded
ft·lb/in²
 ISO 179/1eA
73°F, Injection Molded
ft·lb/in²
 ISO 179/1eA
73°F, Injection Molded
ft·lb/in²
 ISO 179/2C
Charpy impact strength
     ISO 179/1eU 2
-22°F
 
  
73°F
 
  
Notched Izod Impact Strength
     ISO 180/A
-22°F, Injection Molded
ft·lb/in²
  
73°F, Injection Molded
ft·lb/in²
  
Tensile notched impact strength (73°F)
ft·lb/in²
 ISO 8256/1 2
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
      
66 psi
°F
 ISO 75-2 2
264 psi, Annealed
°F
 ISO 75-2/A
264 psi
°F
 ISO 75-2 2
Vicat Softening Temperature
°F
 ISO 306/B50
CLTE
     ISO 11359-2 2
Flow
in/in/°F
  
Transverse
in/in/°F
  
Electrical
Nominal Value
Unit
Test Method
Volume resistivity
ohm·in
 IEC 60093 2
Relative Permittivity
     IEC 60250 2
100 Hz
 
  
1 MHz
 
  
Dissipation Factor
     IEC 60250 2
100 Hz
 
  
1 MHz
 
  
Flammability
Nominal Value
Unit
Test Method
Burning Rate 5 (0.0787 in)
in/min
 ISO 3795
Flame Rating - UL 5
     UL 94
0.0591 in
 
  
0.118 in
 
  
Burning Behav. at 1.6mm nom. thickn. (0.06 in, UL)
 
 ISO 1210 2
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: MAGNUM™ 3404, MAGNUM 3404, MAGNUM™ , MAGNUM, MAGNUM3404, 3404, Acrylonitrile Butadiene Styrene, ABS, Styron, AcrylonitrileButadieneStyrene
Notes
1Typical properties: these are not to be construed as specifications.
2Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
30.079 in/min
43-points
5This rating not intended to reflect hazards presented by this or any other material under actual fire conditions.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.