IDES Prospector Already have an account? Login Here

IDES

TYRIL™ 867 E

SAN Resin

Supplied by Styron LLC

The technical datasheet with complete property values for TYRIL™ 867 E is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
TYRIL* styrene-acrylonitrile (SAN) resins are designed by Styron to offer superior chemical resistance, strength, hardness and dimensional stability in a broad range of product applications. The key property of TYRIL 867 is excellent balance of physical properties. TYRIL 867 E is specifically designed to provide good processability, good chemical and heat resistance and very good strength. The UV-stabilized version exhibits excellent weather ability, suitable in particular for extruded sheet and thermoforming applications.

Applications:
  • Small appliances: transparent kitchen-robot parts
  • Extruded sheet for shower cabinets, light-diffusers
  • Housewares: food storage containers
  • Sanitary accessories: soap dishes, toilet seats

Complies with:
  • U.S. FDA 21 CFR 181.32
  • European Food-Contact Compliance
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Agency Ratings 
 
Forms 
  • Pellets
Processing Method 
  • Blow Molding
  • Extrusion
  • Injection Molding
  • Sheet Extrusion
  • Thermoforming
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183/B
--
lb/in³
 ISO 1183 2
Apparent Density
g/cm³
 ASTM D1895, ISO 60
Melt Mass-Flow Rate (MFR)
     ASTM D1238, ISO 1133
220°C/10.0 kg
g/10 min
  
230°C/3.8 kg
g/10 min
  
Melt volume-flow rate (220°C/10.0 kg)
in³/10min
 ISO 1133 2
Water Absorption
     ISO 62 2
Saturation
%
  
Equilibrium
%
  
Viscosity number
cm³/g
 ISO 307, 1157, 1628 2
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ASTM D638, ISO 527-2
Tensile Stress
      
Yield
psi
 ISO 527-2 2
Break 3
psi
 ASTM D638
Break
psi
 ISO 527-2/5
Tensile Strain (Yield)
%
 ISO 527-2 2
Nominal strain at break
%
 ISO 527-2 2
Flexural Strength
psi
 ASTM D790, ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Unnotched Impact Strength
      
73°F
ft·lb/in²
 ISO 179
-22°F
ft·lb/in²
 ISO 179/1eU 2
73°F
ft·lb/in²
 ISO 179/1eU 2
Unnotched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180
Tensile notched impact strength (73°F)
ft·lb/in²
 ISO 8256/1 2
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (M-Scale)
 
 ASTM D785, ISO 2039-2
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
      
264 psi, Annealed
°F
 ASTM D648, ISO 75-2/A
264 psi
°F
 ISO 75-2 2
Vicat Softening Temperature
      
--
°F
 ASTM D1525 4, ISO 306/B50 4
--
°F
 ASTM D1525 5, ISO 306/A120 5
50°C/h, B (50N)
°F
 ISO 306 2
CLTE
      
Flow
in/in/°F
 DIN 53752, ISO 11359-2 2
Transverse
in/in/°F
 ISO 11359-2 2
Specific Heat
Btu/lb/°F
 ASTM D2766
Electrical
Nominal Value
Unit
Test Method
Surface resistivity
ohm
 IEC 60093 2
Volume resistivity
ohm·in
 IEC 60093 2
Relative Permittivity
      
1 MHz
 
 IEC 60250
100 Hz
 
 IEC 60250 2
Dissipation Factor (1 MHz)
 
 IEC 60250
Electric Strength
V/mil
 IEC 60243-1
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL 6 (0.0630 in)
 
 UL 94
Burning Behav. at 1.6mm nom. thickn. (0.06 in, UL)
 
 ISO 1210 2
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: TYRIL™ 867 E, TYRIL 867 E, TYRIL™ , TYRIL, TYRIL867E, 867 E, 867E, Styrene Acrylonitrile, SAN, Styron, StyreneAcrylonitrile, E867
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (1), FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
2Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
30.20 in/min
4Rate A (50°C/h), Loading 2 (50 N)
5Rate B (120°C/h), Loading 1 (10 N)
6This rating not intended to reflect hazards presented by this or any other material under actual fire conditions.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.