IDES Prospector Already have an account? Login Here

IDES

Denka ABS ML-24

Acrylonitrile Butadiene Styrene

Supplied by DENKA

The technical datasheet with complete property values for Denka ABS ML-24 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
DENKA ABS ML-24 is a new champagne gold colored resin compound that gives dignified-and-soft, precise metallic appearance different from a conventional material prepared by surface modification. Features include two-color molding possibilities, hot stamping abilities, excellent regrind performance, no peeling or cracking problems, and performs excellent electrical insulation.
General  
Material Status 
  • Commercial: Discontinued
Availability 
  • Asia Pacific
  • Europe
  • North America
Features 
  • Electrically Insulating
  • Good Crack Resistance
  • High Flow
  • Platable
  
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (250°C/5.0 kg)
g/10 min
 ASTM D1238
Molding Shrinkage     ASTM D955
Flow
in/in
  
Across Flow
in/in
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Flexural Strength
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648
Vicat Softening Temperature
°F
 ASTM D1525
Electrical
Nominal Value
Unit
Test Method
Dielectric Constant     ASTM D150
60 Hz
 
  
1 kHz
 
  
1 MHz
 
  
Dissipation Factor     ASTM D150
60 Hz
 
  
1 kHz
 
  
1 MHz
 
  
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
 
 UL 94
Additional Information
Melt Flow Index, Denka Test Method, 250°C, 5kg: 50 g/10min
Dielectric Constant and Dielectric Loss Tangent (Dissipation Factor) were tested according to the bridge method.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Denka ABS ML-24, Denka ABS ML24, Denka ABS , DenkaABSML24, DenkaABS, ML, ABSML-24, ABSML24, ABSML:24, ABSML/24, ABSML+24, ABSML_24, ABSML 24, ABSML, ML-24, ML24, ML:24, ML/24, ML+24, ML_24, ML 24, Acrylonitrile Butadiene Styrene, ABS, Denka, AcrylonitrileButadieneStyrene, 24ML, 24ABSML
Features
Features may also be described by the following terms: Good Crack Resistance, Crack Resistant, High Flow, High Melt, High MFI.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.