IDES Prospector Already have an account? Login Here

IDES

Daplen™ BHC5012

Polypropylene Copolymer

Supplied by Borealis AG

The technical datasheet with complete property values for Daplen™ BHC5012 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
BHC5012 is a heterophasic copolymer.

This grade is suitable for the manufacturing of unoriented films on cast and tubular quench film lines.

BHC5012 Slip and antiblock free additives
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Europe
  • North America
  • South America
  
Features 
  • Copolymer
  • Good Heat Seal
  • Good Toughness
  • High Impact Resistance
  • Low Gel
  • Low Temperature Impact Resistance
  • Weldable
Uses 
  • Cast Film
  • Food Packaging
  • Laminates
  • Oriented Film
  • Stationary Supplies
Forms 
  • Pellets
Processing Method 
  • Cast Film
Physical
Nominal Value
Unit
Test Method
Density      
--
g/cm³
 ISO 1183
--
lb/in³
 ISO 1183 2
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Melt volume-flow rate (230°C/2.16 kg)
in³/10min
 ISO 1133 2
Mechanical
Nominal Value
Unit
Test Method
Tensile modulus
psi
 ISO 527-2 2
Tensile Stress (Yield)
psi
 ISO 527-2 2
Tensile Strain (Yield)
%
 ISO 527-2 2
Nominal strain at break
%
 ISO 527-2 2
Flexural Modulus 3 (73°F, Injection Molded)
psi
 ISO 178
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Tensile Modulus     ISO 527-3
MD: 2.0 mil
psi
  
TD: 2.0 mil
psi
  
Tensile Strength     ISO 527-3
MD: 2.0 mil
psi
  
TD: 2.0 mil
psi
  
Tensile Elongation     ISO 527-3
MD: Break, 2.0 mil
%
  
TD: Break, 2.0 mil
%
  
Instrumented Dart Impact 4 (2.0 mil, Total Energy)
ft·lb
 ISO 7765-2
Impact
Nominal Value
Unit
Test Method
Charpy notched impact strength     ISO 179/1eA 2
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Charpy impact strength     ISO 179/1eU 2
-22°F
ft·lb/in²
  
73°F
 
  
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi)
°F
 ISO 75-2 2
Vicat Softening Temperature      
--
°F
 ISO 306/A50
50°C/h, B (50N)
°F
 ISO 306 2
Melting Temperature (DSC)
°F
 ISO 3146
Optical
Nominal Value
Unit
Test Method
Gloss (60°, 1.97 mil)
 
 ASTM D2457
Haze (1.97 mil)
%
 ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Daplen™ BHC5012, Daplen BHC5012, Daplen™ , Daplen, DaplenBHC5012, BHC 5012, BHC5012, Polypropylene Copolymer, PP Copolymer, Polypropylene, PP, Borealis, PolypropyleneCopolymer, PPCopolymer, 5012BHC
Features
Features may also be described by the following terms: High Impact Resistance, Low Temperatuer Impact Resistance, Low Temp Impact Resistance, Low Gel, Good Heat Seal, Good Toughness, Tough.
Uses
Uses may also be described by the following terms: Cast Film, Food Packaging, Oriented Film.
Notes
1Typical properties: these are not to be construed as specifications.
2Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
30.079 in/min
4Force: 25 N
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.