IDES Prospector Already have an account? Login Here

IDES

PRL PC/TP-GP3

Polycarbonate + Polyester

Supplied by Polymer Resources Ltd.

The technical datasheet with complete property values for PRL PC/TP-GP3 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • Impact Modifier
Features 
  • General Purpose
  • Good Chemical Resistance
  • Impact Modified
  • Low Temperature Impact Resistance
  • Ultra High Impact Resistance
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (265°C/2.16 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
     ASTM D638
Yield, 0.125 in
psi
  
Break, 0.125 in
psi
  
Flexural Modulus (0.125 in)
psi
 ASTM D790
Flexural Strength (Break, 0.125 in)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     ASTM D256
-40°F, 0.125 in
ft·lb/in
  
73°F, 0.125 in
ft·lb/in
  
Gardner Impact (0.125 in)
in·lb
 ASTM D3029
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed, 0.125 in
°F
  
264 psi, Unannealed, 0.125 in
°F
  
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0625 in
 
  
0.125 in
 
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: PRL PC/TP-GP3, PRL PCTPGP3, PRL , PRLPCTPGP3, PC, PC TP GP 3, PC/TP-GP3, PCTPGP3, PC:TP-GP3, PC+TP-GP3, PC-TP-GP3, PC_TP-GP3, PC TP-GP3, PC/TP:GP3, PC/TP/GP3, PC/TP+GP3, PC/TP_GP3, PC/TP GP3, PCTP, TPGP, GP3, PC_TPGP3, PC TPGP3, PCTP_GP3, PCTP GP3, Polycarbonate + Polyester, Polycarbonate Polyester, Polycarbonate : Polyester, Polycarbonate / Polyester, Polycarbonate - Polyester, Polycarbonate _ Polyester, Polycarbonate Polyester, PC+Polyester, PCPolyester, PC:Polyester, PC/Polyester, PC-Polyester, PC_Polyester, PC Polyester, Polycarbonate, Polymer Res, PolycarbonatePolyester, Polycarbonate_Polyester, TPPC
Features
Features may also be described by the following terms: Good Chemical Resistance, Chemical Resistant, Ultra High Impact Resistance, Low Temperatuer Impact Resistance, Low Temp Impact Resistance.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Drying Time, Maximum
hr
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.