IDES Prospector Already have an account? Login Here

IDES

PRL PC-BR1-UV

Polycarbonate

Supplied by Polymer Resources Ltd.

The technical datasheet with complete property values for PRL PC-BR1-UV is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • UV Stabilizer
Features 
  • Good UV Resistance
  • Medium Heat Resistance
  • Ultra High Impact Resistance
  • Very high Viscosity
  
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Blow Molding
  • Extrusion
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (300°C/1.2 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow (0.125 in)
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
     ASTM D638
Yield, 0.125 in
psi
  
Break, 0.125 in
psi
  
Tensile Elongation
     ASTM D638
Yield, 0.125 in
%
  
Break, 0.125 in
%
  
Flexural Modulus (0.125 in)
psi
 ASTM D790
Flexural Strength (0.125 in)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.125 in)
ft·lb/in
 ASTM D256
Gardner Impact (0.125 in)
in·lb
 ASTM D3029
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness
     ASTM D785
M-Scale
 
  
R-Scale
 
  
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed, 0.125 in
°F
  
264 psi, Unannealed, 0.125 in
°F
  
Vicat Softening Temperature
°F
 ASTM D1525 2
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0591 in)
 
 UL 94
UL File Number
 
  
UL
Nominal Value
Unit
Test Method
RTI Str (0.0591 in)
°F
 UL 746
RTI Imp (0.0591 in)
°F
 UL 746
RTI Elec (0.0591 in)
°F
 UL 746
Optical
Nominal Value
Unit
Test Method
Transmittance (100 mil)
%
 ASTM D1003
Haze (100 mil)
%
 ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: PRL PC-BR1-UV, PRL PCBR1UV, PRL , PRLPCBR1UV, PC, PC BR 1 UV, PC-BR1-UV, PCBR1UV, PC:BR1:UV, PC/BR1/UV, PC+BR1+UV, PC_BR1_UV, PC BR1 UV, PCBR, BR1, 1UV, Polycarbonate, Polymer Res, BRPC
Features
Features may also be described by the following terms: Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant, Very High Viscosity, Ultra High Impact Resistance, Medium Heat Resistance.
Extrusion
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Melt Temperature
°F
  
Die Temperature
°F
  
Extrusion Notes
Do not exceed 8 hour drying time.
Mold Temperature: 180° to 240°F
Notes
1Typical properties: these are not to be construed as specifications.
2Rate B (120°C/h), Loading 2 (50 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.