IDES Prospector Already have an account? Login Here

IDES

Luran® S 797 SE

Acrylonitrile Styrene Acrylate

Supplied by Styrolution

The technical datasheet with complete property values for Luran® S 797 SE is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Luran S 797 SE is an extrusion ASA grade with especially high notched impact strength, used for sheet and profile extrusions. The data representable is based on extruded sheet.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Additive 
  • Impact Modifier
Features 
  • High Impact Resistance
  • Impact Modified
 
Uses 
  • Profiles
  • Sheet
 
Agency Ratings 
 
RoHS Compliance 
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Profile Extrusion
  • Sheet Extrusion
Multi-Point Data 
  • Creep Modulus vs. Time (ISO 11403-1)
  • Isochronous Stress vs. Strain (ISO 11403-1)
  • Isothermal Stress vs. Strain (ISO 11403-1)
  • Secant Modulus vs. Strain (ISO 11403-1)
  • Viscosity vs. Shear Rate (ISO 11403-2)
Physical
Nominal Value
Unit
Test Method
Specific Gravity
     
--
 
ASTM D792
--
g/cm³
ISO 1183
Melt Volume-Flow Rate (MVR)
     
220°C/10.0 kg
in³/10min
ASTM D1238
220°C/10.0 kg
in³/10min
ISO 1133
Molding Shrinkage - Flow
in/in
ASTM D955
Water Absorption (Saturation, 73°F)
%
ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
ASTM D638
Tensile Strength (Yield, 73°F)
psi
ASTM D638
Tensile Elongation 2 (Yield, 73°F)
%
ASTM D638
Flexural Modulus (73°F)
psi
ASTM D790
Flexural Strength (73°F)
psi
ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
    ASTM D256
-40°F
ft·lb/in
 
73°F
ft·lb/in
 
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Annealed)
°F
ASTM D648
Vicat Softening Temperature
°F
ASTM D1525 3
CLTE - Flow
in/in/°F
ISO 11359-2
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohm
ASTM D257, IEC 60093
Volume Resistivity
ohm·cm
ASTM D257, IEC 60093
Dielectric Constant
     
0.0394 in, 1 MHz
 
ASTM D150
100 Hz
 
IEC 60250
1 MHz
 
IEC 60250
Dissipation Factor
    IEC 60250
100 Hz
 
 
1 MHz
 
 
Comparative Tracking Index
V
IEC 60112
Electric Strength (0.0591 in)
V/mil
IEC 60243-1
Optical
Nominal Value
Unit
Test Method
Gardner Gloss (60°)
 
ASTM D523
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Luran® S 797 SE, Luran S 797 SE, Luran® S , Luran S, LuranS797SE, LuranS, S 797 SE, S797 SE, S797, S797SE, 797 SE, 797SE, Acrylonitrile Styrene Acrylate, ASA, Styrolution, AcrylonitrileStyreneAcrylate, SE797, 797S
Features
Features may also be described by the following terms: High Impact Resistance.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): ULC (1), EC (1).
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Suggested Max Regrind
%
 
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
3Rate A (50°C/h), Loading 2 (50 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.