Kostil® B 366 Polimeri Europa Styrene Acrylonitrile

Product Description

Kostil B 366 is a Styrene-Acrylonitrile copolymer with a good chemical resistance and a very low residual monomers content.

This easy flow grade exhibits a high clarity and it is designed for the moulding of items with complex shapes and/or with thin walls with fast cycles.

Designation: Thermoplastics ISO 4894-SAN 2,MRS,105-25

Applications: Lighting, bathroom furnishing, catering (cups, trays), stationery, toys, displays. Cosmetic, medical and pharmaceutical items.

Kostil B 366 is available in some standard transparent colours (2000, 2030, 2050).

This grade, in natural version, complies by composition with the requirements set by the main Regulations for plastic materials intended for food contact (included the EEC Directive 90/128 and following amendments).

General

Material Status

Commercial: Active

Availability

Europe

Features

Copolymer

Fast Molding Cycle

Food Contact Acceptable

Good Chemical Resistance

Good Flow

High Clarity

Low Residuals

Uses

Bathroom Accessories

Cosmetics

Cups

Decorative Displays

Lighting Fixtures

Medical/Healthcare Applications

Pharmaceuticals

Stationary Supplies

Support Trays

Thin-walled Parts

Toys

Agency Ratings

Appearance

Clear/Transparent

Natural Color

Forms

Pellets

Processing Method

Injection Molding

Multi-Point Data

Isothermal Stress vs. Strain (ISO 11403-1)

Secant Modulus vs. Strain (ISO 11403-1)

Shear Modulus vs. Temperature (ISO 11403-1)

Specific Heat vs. Temperature (ISO 11403-2)

Specific Volume vs Temperature (ISO 11403-2)

Viscosity vs. Shear Rate (ISO 11403-2)

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Apparent Density		g/cm³	ISO 60
Melt Mass-Flow Rate (MFR) (220°C/10.0 kg)		g/10 min	ISO 1133
Molding Shrinkage		%	Internal Method
Water Absorption (73°F, 24 hr)		%	ISO 62
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2/1
Tensile Stress (Break)		psi	ISO 527-2/5
Tensile Strain (Break)		%	ISO 527-2/5
Flexural Strength²		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Unnotched Impact Strength (73°F)		ft·lb/in²	ISO 179/2U
Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (M-Scale)			ISO 2039-2
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (264 psi, Annealed)		°F	ASTM D648
Vicat Softening Temperature
--		°F	ISO 306/A50
--		°F	ISO 306/B50
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL (0.0630 in)			UL 94
Additional Information	Nominal Value	Unit	Test Method
Designation
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Kostil® B 366, Kostil B 366, Kostil® , Kostil, KostilB366, B 366, B366, Styrene Acrylonitrile, SAN, Polimeri Europa, StyreneAcrylonitrile, 366B
Features
Features may also be described by the following terms: Low Residuals, Good Flow, Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle, High Clarity, Good Chemical Resistance, Chemical Resistant.
Uses
Uses may also be described by the following terms: Support Trays, Thin-walled Parts, Thin Walled Parts, Thin-wall Parts, Thin wall Parts, Thinwall Parts, Medical Applications, Decorative Displays.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (1).

Injection	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Processing (Melt) Temp		°F
Mold Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

²0.079 in/min

Kostil® B 366

Styrene Acrylonitrile

Supplied by Polimeri Europa