IDES Prospector Already have an account? Login Here

IDES

Network Polymers SAN 300

Styrene Acrylonitrile

Supplied by Network Polymers, Inc.

The technical datasheet with complete property values for Network Polymers SAN 300 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Agency Ratings 
Appearance 
  • Natural Color
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) 2
     ASTM D1238
200°C/5.0 kg
g/10 min
  
230°C/3.8 kg
g/10 min
  
Molding Shrinkage - Flow
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 3 (Yield)
psi
 ASTM D638
Flexural Modulus - Tangent 4
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.125 in)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed, 0.125 in)
°F
 ASTM D648
Vicat Softening Temperature
°F
 ASTM D1525 5
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0591 in)
 
 UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Network Polymers SAN 300, Network Polymers SAN , NetworkPolymersSAN300, NetworkPolymersSAN, SAN 300, SAN300, SAN, 300, Styrene Acrylonitrile, Network Poly, StyreneAcrylonitrile, 300SAN
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Shot Size
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Injection Rate
 
  
Back Pressure
psi
  
Clamp Tonnage
tons/in²
  
Notes
1Typical properties: these are not to be construed as specifications.
2Procedure A
32.0 in/min
40.050 in/min
5Loading 1 (10 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.