IDES Prospector Already have an account? Login Here

IDES

Appeel® 1181

Ethylene Vinyl Acetate Copolymer

Supplied by DuPont Packaging & Industrial Polymers

The technical datasheet with complete property values for Appeel® 1181 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Appeel® 1181 is a modified ethylene vinyl acetate resin designed to function as a sealing layer for lidding applications. It is most often suggested to provide peelable seals over a broad temperature range to a number of container materials including PP, PET, PS and aluminum. It will also provide destruct seals to PVC and PE. Appeel® 1181 is available in pellet form for use in conventional extrusion and coextrusion equipment designed to process polyethylene resins
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • High Clarity
  • Low Temperature Heat Sealability
  
Uses 
  • Seals
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Coextrusion
  • Extrusion
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238, ISO 1133
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ASTM D1525, ISO 306
Melting Temperature
°F
 ASTM D3418, ISO 3146
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Appeel® 1181, Appeel 1181, Appeel® , Appeel, Appeel1181, 1181, Ethylene Vinyl Acetate Copolymer, EVA, Polyethylene, PE, DuPont P&IP, EthyleneVinylAcetateCopolymer
Features
Features may also be described by the following terms: High Clarity, Low Temperature Heat Sealability, Low Temperature Heat Seal.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Adapter Temperature
°F
  
Melt Temperature
°F
  
Die Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.