|
Specific Gravity
|
|
|
ASTM D792 |
|
Apparent Density
|
|
g/cm³
|
ASTM D1895 |
|
Melt Mass-Flow Rate (MFR) (230°C/5.0 kg)
|
|
g/10 min
|
ASTM D1238 |
|
Molding Shrinkage - Flow
|
|
in/in
|
ASTM D955 |
|
Water Absorption (Saturation)
|
|
%
|
ASTM D570 |
|
Tensile Modulus
|
|
psi
|
ASTM D638 |
|
Tensile Strength
|
|
psi
|
ASTM D638 |
|
Tensile Elongation
|
|
|
ASTM D638 |
|
Yield
|
|
%
|
|
|
Break
|
|
%
|
|
|
Flexural Modulus
|
|
psi
|
ASTM D790 |
|
Flexural Strength
|
|
psi
|
ASTM D790 |
|
Notched Izod Impact
|
|
|
ASTM D256 |
|
32°F, 0.250 in
|
|
ft·lb/in
|
|
|
73°F, 0.250 in
|
|
ft·lb/in
|
|
|
Rockwell Hardness (M-Scale)
|
|
|
ASTM D785 |
|
Deflection Temperature Under Load
|
|
|
ASTM D648 |
|
264 psi, Unannealed
|
|
°F
|
|
|
264 psi, Annealed, 0.250 in
|
|
°F
|
|
|
Vicat Softening Temperature
|
|
°F
|
ASTM D1525 |
|
CLTE - Flow (32 to 212°F)
|
|
in/in/°F
|
ASTM D696 |
|
Transmittance (126 mil)
|
|
%
|
ASTM D1003 |
|
Haze (126 mil)
|
|
%
|
ASTM D1003 |
|
Yellowness Index (0.126 in)
|
|
YI
|
Internal Method |
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: CYROLITE® GS-90, CYROLITE GS90, CYROLITE® , CYROLITE, CYROLITEGS90, GS, GS-90, GS90, GS:90, GS/90, GS+90, GS_90, GS 90, Acrylic, Acrylic, Polymethyl Methacrylate, Acrylic Polymethyl Methacrylate, Acrylic (PMMA), Acrylic PMMA, pmma, Cyro, AcrylicPolymethylMethacrylate, AcrylicPMMA, 90GS
|
|
Features may also be described by the following terms: High Clarity, Ethylene Oxide Sterilizable, EtO Sterilizable, EtO Sterilization, Ethylene Oxide Sterilizable, Good Impact Resistance, Good Chemical Resistance, Chemical Resistant, Radiation Sterilizable, Radiation Sterilization, gamma sterilization, gamma sterilizable, Bondability, Bondable, Good Color Stability, High Flow, High Melt, High MFI, e-beam Sterilization, E-beam Sterilizable, electron beam, electron-beam, electron beam radiation, e-beam radiation.
|
|
Uses may also be described by the following terms: Medical Applications, Appliance Components, Appliance Parts, Valves, Valve Parts.
|
|
This plastic material has 3 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EC (1), FDA (1), USP (1).
|