IDES Prospector Already have an account? Login Here

IDES

GAPEX® RPP10EB18WH

Polypropylene Homopolymer

Glass Fiber Reinforcement, 10%

Supplied by Ferro Corporation

The technical datasheet with complete property values for GAPEX® RPP10EB18WH is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 10% Filler by Weight
Features 
  • Homopolymer
Appearance 
  • White
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (73°F)
psi
 ASTM D638
Flexural Modulus - 1% Tangent
psi
 ASTM D790
Flexural Strength (73°F)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
 ASTM D256
Unnotched Izod Impact (73°F)
ft·lb/in
 ASTM D256
Gardner Impact
in·lb
 ASTM D3029
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed
°F
  
264 psi, Unannealed
°F
  
Additional Information
Flexural Modulus, ASTM D790, 1% Secant: 345000 psi
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: GAPEX® RPP10EB18WH, GAPEX RPP10EB18WH, GAPEX® , GAPEX, GAPEXRPP10EB18WH, RPP 10 EB 18 WH, RPP10EB18WH, RPP10, 10EB, EB18, 18WH, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Ferro, PolypropyleneHomopolymer, PPHomopolymer, 10RPP
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Back Pressure
psi
  
Cushion
in
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.