IDES Prospector Already have an account? Login Here

IDES

Terluran® GP-35

Acrylonitrile Butadiene Styrene

Supplied by Styrolution

The technical datasheet with complete property values for Terluran® GP-35 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Terluran GP-35 is a very high flow grade of ABS for injection molding with good resistance to impact and heat deflection.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Additive 
  • Impact Modifier
Features 
  • Good Impact Resistance
  • High Flow
  • Impact Modified
Agency Ratings 
RoHS Compliance 
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Multi-Point Data 
  • Isothermal Stress vs. Strain (ISO 11403-1)
  • Secant Modulus vs. Strain (ISO 11403-1)
  • Shear Modulus vs. Temperature (ISO 11403-1)
  • Viscosity vs. Shear Rate (ISO 11403-2)
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR)
      
200°C/5.0 kg
in³/10min
 ASTM D1238
220°C/10.0 kg
in³/10min
 ASTM D1238, ISO 1133
230°C/3.8 kg
in³/10min
 ASTM D1238
Molding Shrinkage - Flow
in/in
 ASTM D955
Water Absorption (Saturation, 73°F)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
      
73°F
psi
 ASTM D638
73°F
psi
 ISO 527-2
Tensile Strength
      
Yield, 73°F
psi
 ASTM D638
Yield, -40°F
psi
 ISO 527-2
Yield, 73°F
psi
 ISO 527-2
Yield, 176°F
psi
 ISO 527-2
Break 2
psi
 ASTM D638
Tensile Elongation
      
Yield, 73°F 2
%
 ASTM D638
Yield, 73°F
%
 ISO 527-2
Nominal Tensile Strain at Break (73°F)
%
 ISO 527-2
Flexural Modulus (73°F)
psi
 ASTM D790
Flexural Strength (73°F)
psi
 ASTM D790, ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Charpy Unnotched Impact Strength
     ISO 179
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Notched Izod Impact
     ASTM D256
-22°F
ft·lb/in
  
0°F
ft·lb/in
  
73°F
ft·lb/in
  
Unnotched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
      
66 psi, Unannealed
°F
 ASTM D648
66 psi, Unannealed
°F
 ISO 75-2/B
66 psi, Annealed
°F
 ASTM D648
264 psi, Unannealed
°F
 ASTM D648
264 psi, Unannealed
°F
 ISO 75-2/A
264 psi, Annealed
°F
 ASTM D648
Vicat Softening Temperature
°F
 ISO 306/B50, ASTM D1525 3
CLTE - Flow
in/in/°F
 ISO 11359-2
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
 ASTM D257, IEC 60093
Electric Strength (0.0591 in)
V/mil
 IEC 60243-1
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Terluran® GP-35, Terluran GP35, Terluran® , Terluran, TerluranGP35, GP, GP-35, GP35, GP:35, GP/35, GP+35, GP_35, GP 35, Acrylonitrile Butadiene Styrene, ABS, Styrolution, AcrylonitrileButadieneStyrene, 35GP
Features
Features may also be described by the following terms: Good Impact Resistance, High Flow, High Melt, High MFI.
Agency Ratings
This plastic material has 6 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): ULC (1), FDA (1), NSF (3), EC (1).
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
3Rate A (50°C/h), Loading 2 (50 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.