IDES Prospector Already have an account? Login Here

IDES

Geon™ Fiberloc™ 85520

Rigid Polyvinyl Chloride

Glass Fiber Reinforcement, 20%

Supplied by PolyOne Corporation

The technical datasheet with complete property values for Geon™ Fiberloc™ 85520 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • North America
  • South America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 20% Filler by Weight
Features 
  • General Purpose
  • Medium Flow
 
Uses 
  • Construction Applications
  • General Purpose
  • Outdoor Applications
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
ASTM D792
Molding Shrinkage - Flow
in/in
ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus 2
psi
ASTM D638
Tensile Strength 2 (Yield)
psi
ASTM D638
Tensile Elongation 2 (Break)
%
ASTM D638
Flexural Modulus
psi
ASTM D790
Flexural Strength
psi
ASTM D790
Poisson's Ratio
 
ASTM E132
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.125 in, Injection Molded)
ft·lb/in
ASTM D256A
Unnotched Izod Impact 3 (73°F, 0.125 in)
ft·lb/in
ASTM D4812
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Annealed, 0.250 in)
°F
ASTM D648
CLTE - Flow
in/in/°F
ASTM D696
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Geon™ Fiberloc™ 85520, Geon Fiberloc 85520, Geon™ Fiberloc™ , Geon Fiberloc, GeonFiberloc85520, GeonFiberloc, 85520, Polyvinyl Chloride, Rigid, Polyvinyl Chloride Rigid, PVC, Rigid, PVC Rigid, Polyvinyl Chloride, PVC, PolyOne, PolyvinylChlorideRigid, PVCRigid, PolyvinylChloride
Features
Features may also be described by the following terms: Medium Flow, Medium Melt, Medium MFI.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
2Type I, 2.0 in/min
3Injection Molded
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.