IDES Prospector Already have an account? Login Here

IDES

Formolene® 2510A

Polypropylene Impact Copolymer

Supplied by Formosa Plastics Corporation, U.S.A.

The technical datasheet with complete property values for Formolene® 2510A is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Formolene® 2510A is a medium impact copolymer of polypropylene for use in injection molding applications including battery cases and lids. It is characterized by easy mold flow, physical property balance and excellent dimensional stability. It contains a unique combination of stabilizers, which provides excellent processing and usage performance.

Formolene® 2510A meets all requirements of the U. S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct food contact.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • Unspecified Stabilizer
Features 
  • Food Contact Acceptable
  • Good Dimensional Stability
  • Good Flow
  • Good Processability
  • Impact Copolymer
  • Medium Impact Resistance
Uses 
  • Battery Cases
  • Lids
  
Agency Ratings 
 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield, Injection Molded)
psi
 ASTM D638
Tensile Elongation 2 (Yield, Injection Molded)
%
 ASTM D638
Flexural Modulus - 1% Secant 3 (Injection Molded)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     ASTM D256
32°F, Injection Molded
ft·lb/in
  
73°F, Injection Molded
ft·lb/in
  
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale, Injection Molded)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed, Injection Molded)
°F
 ASTM D648
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Formolene® 2510A, Formolene 2510A, Formolene® , Formolene, Formolene2510A, 2510 A, 2510A, Polypropylene Impact Copolymer, PP Impact Copolymer, Polypropylene, PP, Formosa Plastics, PolypropyleneImpactCopolymer, PPImpactCopolymer, A2510
Features
Features may also be described by the following terms: Impact Copolymer, Medium Impact Resistance, Good Processability, Easy Processing, Good Flow, Good Dimensional Stability, Dimensionally Stable.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), EC (1).
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
30.051 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.