IDES Prospector Already have an account? Login Here

IDES

Formolene® 4100N

Polypropylene Homopolymer

Supplied by Formosa Plastics Corporation, U.S.A.

The technical datasheet with complete property values for Formolene® 4100N is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Formolene® 4100N is a medium viscosity, highly isotactic, polypropylene homopolymer designed for various general purpose injection molding applications such as closures, small appliances, housewares and toys. It contains a unique combination of stabilizers, which provides excellent processability with good stiffness, environmental stress crack resistance, heat performance and minimal odor & taste.

Formolene® 4100N meets all requirements of the U. S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct food contact.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • Unspecified Stabilizer
Features 
  • Food Contact Acceptable
  • General Purpose
  • Good Processability
  • Good Stiffness
  • High ESCR (Stress Crack Resist.)
  • High Heat Resistance
  • High Isotactic
  • Homopolymer
  • Low to No Odor
  • Low to No Taste
  • Medium Viscosity
Uses 
  • Appliances
  • Closures
  • General Purpose
  • Household Goods
  • Toys
Agency Ratings 
 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield, Injection Molded)
psi
 ASTM D638
Tensile Elongation 2 (Yield, Injection Molded)
%
 ASTM D638
Flexural Modulus - 1% Secant 3 (Injection Molded)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, Injection Molded)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale, Injection Molded)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
 ASTM D648
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Formolene® 4100N, Formolene 4100N, Formolene® , Formolene, Formolene4100N, 4100 N, 4100N, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Formosa Plastics, PolypropyleneHomopolymer, PPHomopolymer, N4100
Features
Features may also be described by the following terms: Medium Viscosity, Low Taste, Good Stiffness, Good Processability, Easy Processing, Low Odor, High Heat Resistance, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, High Isotactic, High Isotacticity.
Uses
Uses may also be described by the following terms: Household Goods, Housewares.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), EC (1).
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
30.051 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.