IDES Prospector Already have an account? Login Here

IDES

Formolene® 4101M

Polypropylene Homopolymer

Supplied by Formosa Plastics Corporation, U.S.A.

The technical datasheet with complete property values for Formolene® 4101M is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Formolene® 4101M is polypropylene homopolymer designed for staple fiber applications. It contains a unique combination of stabilizers and additives, which provides excellent processability and good end use performance. It provides excellent resistance to gas fading.

Formolene® 4101M meets all requirements of the U. S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct food contact.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • Unspecified Additive
  • Unspecified Stabilizer
  
Features 
  • Food Contact Acceptable
  • Gas-fading Resistant
  • Good Processability
  • Good Stability
  • Homopolymer
Uses 
  • Staple Fibers
Agency Ratings 
 
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/3.8 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield, Injection Molded)
psi
 ASTM D638
Tensile Elongation 2 (Yield, Injection Molded)
%
 ASTM D638
Flexural Modulus - 1% Secant 3 (Injection Molded)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, Injection Molded)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale, Injection Molded)
 
 ASTM D785
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Formolene® 4101M, Formolene 4101M, Formolene® , Formolene, Formolene4101M, 4101 M, 4101M, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Formosa Plastics, PolypropyleneHomopolymer, PPHomopolymer, M4101
Features
Features may also be described by the following terms: Good Processability, Easy Processing, Good Stability, Gas-fading Resistant, Gas Fading Resistant.
Uses
Uses may also be described by the following terms: Staple Fibers, Staple Fiber.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), EC (1).
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
30.051 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.