IDES Prospector Already have an account? Login Here

IDES

Braskem PE F-2523

Low Density Polyethylene

Supplied by Braskem

The technical datasheet with complete property values for Braskem PE F-2523 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Good sealing characteristics, optical and mechanical properties. It contains antiblock, antistatic, slip and antioxidant additives.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • South America
Additive 
  • Antiblock
  • Antioxidant
  • Antistatic
  • Slip
  
Features 
  • Antiblocking
  • Antioxidant
  • Antistatic
  • Good Heat Seal
  • Opticals
  • Slip
Uses 
  • Film
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Film Extrusion
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Coefficient of Friction (Blown Film)
 
 ASTM D1894
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Tensile Strength
     ASTM D882
MD: Yield, 1.2 mil, Blown Film
psi
  
TD: Yield, 1.2 mil, Blown Film
psi
  
MD: Break, 1.2 mil, Blown Film
psi
  
TD: Break, 1.2 mil, Blown Film
psi
  
Tensile Elongation
     ASTM D882
MD: Break, 1.2 mil, Blown Film
%
  
TD: Break, 1.2 mil, Blown Film
%
  
Dart Drop Impact (1.2 mil, Blown Film)
g
 ASTM D1709A
Elmendorf Tear Strength
     ASTM D1922
MD: 1.2 mil, Blown Film
g
  
TD: 1.2 mil, Blown Film
g
  
Optical
Nominal Value
Unit
Test Method
Gloss (45°, 1.18 mil, Blown Film)
 
 ASTM D2457
Haze (1.18 mil, Blown Film)
%
 ASTM D1003
Additional Information
Film properties taken from 30µm film produced on a 50 mm extruder, L/D=26, die gap=0.5 mm, melt temperature=190°C, BUR=1.8:1
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Braskem PE F-2523, Braskem PE F2523, Braskem PE , BraskemPEF2523, BraskemPE, PEF-2523, PEF2523, PEF:2523, PEF/2523, PEF+2523, PEF_2523, PEF 2523, PEF, F-2523, F2523, F:2523, F/2523, F+2523, F_2523, F 2523, Polyethylene, Low Density, Polyethylene Low Density, LDPE, Polyethylene, PE, Braskem, PolyethyleneLowDensity, 2523F, 2523PEF
Features
Features may also be described by the following terms: Slip, Unspecified Slip, Good Heat Seal, Antiblocking, Unspecified Antiblock.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.