IDES Prospector Already have an account? Login Here

IDES

Toyolac® 250-X10

Acrylonitrile Butadiene Styrene

Supplied by Toray Resin Company

The technical datasheet with complete property values for Toyolac® 250-X10 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Features 
  • General Purpose
  • High Flow
  
Uses 
  • General Purpose
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (220°C/10.0 kg)
g/10 min
 ISO 1133
Molding Shrinkage - Flow
in/in
 ASTM D955
Water Absorption (73°F, 24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Strength
      
Yield, 73°F 2
psi
 ASTM D638
Yield
psi
 ISO 527-2/50
Tensile Elongation
      
Break, 73°F 2
%
 ASTM D638
Break
%
 ISO 527-2/50
Flexural Modulus 3 (73°F)
psi
 ASTM D790
Flexural Strength
      
-- 4
psi
 ISO 178
Yield, 73°F 3
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Notched Izod Impact
     ASTM D256
-22°F, 0.126 in
ft·lb/in
  
-22°F, 0.500 in
ft·lb/in
  
32°F, 0.126 in
ft·lb/in
  
32°F, 0.500 in
ft·lb/in
  
73°F, 0.126 in
ft·lb/in
  
73°F, 0.500 in
ft·lb/in
  
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
      
264 psi, Unannealed, 0.252 in
°F
 ASTM D648
264 psi, Unannealed, 0.500 in
°F
 ASTM D648
264 psi, Unannealed
°F
 ISO 75-2/A
CLTE - Flow
in/in/°F
 ASTM D696
Thermal Conductivity
Btu·in/hr/ft²/°F
 ASTM C177
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 ASTM D257
Volume Resistivity
ohm·cm
 ASTM D257
Dielectric Strength 5
V/mil
 ASTM D149
Dielectric Constant (1 kHz)
 
 ASTM D150
Dissipation Factor (1 kHz)
 
 ASTM D150
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
 
 UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Toyolac® 250-X10, Toyolac 250X10, Toyolac® , Toyolac, Toyolac250X10, 250, 250 X 10, 250-X10, 250X10, 250:X10, 250/X10, 250+X10, 250_X10, 250 X10, 250X, X10, Acrylonitrile Butadiene Styrene, ABS, Toray, AcrylonitrileButadieneStyrene, X250
Features
Features may also be described by the following terms: High Flow, High Melt, High MFI.
Notes
1Typical properties: these are not to be construed as specifications.
20.20 in/min
30.12 in/min
40.079 in/min
5Method A (Short-Time)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.