IDES Prospector Already have an account? Login Here

IDES

Toyolac® 260-X01

Acrylonitrile Butadiene Styrene

Supplied by Toray Resin Company

The technical datasheet with complete property values for Toyolac® 260-X01 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Discontinued
Availability 
  • Europe
  • North America
  
Features 
  • High Flow
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Molding Shrinkage - Flow
in/in
 ASTM D955
Water Absorption (24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield, 73°F)
psi
 ASTM D638
Tensile Elongation (Break, 73°F)
%
 ASTM D638
Flexural Modulus (73°F)
psi
 ASTM D790
Flexural Strength (Yield, 73°F)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     ASTM D256
-22°F, 0.125 in
ft·lb/in
  
-22°F, 0.500 in
ft·lb/in
  
32°F, 0.125 in
ft·lb/in
  
32°F, 0.500 in
ft·lb/in
  
73°F, 0.125 in
ft·lb/in
  
73°F, 0.500 in
ft·lb/in
  
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed, 0.500 in)
°F
 ASTM D648
CLTE - Flow
in/in/°F
 ASTM D696
Thermal Conductivity
Btu·in/hr/ft²/°F
 ASTM C177
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 ASTM D257
Volume Resistivity
ohm·cm
 ASTM D257
Dielectric Strength
V/mil
 ASTM D149
Dielectric Constant (1 kHz)
 
 ASTM D150
Dissipation Factor (1 kHz)
 
 ASTM D150
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
 
 UL 94
Additional Information
Heat Deflection Temperature, ASTM D648, 264psi, 0.25in, Unannealed: 86°C
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Toyolac® 260-X01, Toyolac 260X01, Toyolac® , Toyolac, Toyolac260X01, 260, 260 X 01, 260-X01, 260X01, 260:X01, 260/X01, 260+X01, 260_X01, 260 X01, 260X, X01, Acrylonitrile Butadiene Styrene, ABS, Toray, AcrylonitrileButadieneStyrene, X260
Features
Features may also be described by the following terms: High Flow, High Melt, High MFI.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.