IDES Prospector Already have an account? Login Here

IDES

AQUAMID 66G30

Polyamide 66

Glass Fiber Reinforcement, 30%

Supplied by Aquafil Engineering Plastics Spa

The technical datasheet with complete property values for AQUAMID 66G30 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Dry
Conditioned
Unit
Test Method
Density
--
g/cm³
ISO 1183
Molding Shrinkage (73°F)
--
%
ISO 294-4
Water Absorption (Saturation, 73°F)
--
%
ISO 62
Mechanical
Dry
Conditioned
Unit
Test Method
Tensile Modulus (73°F)
--
psi
ISO 527-2/1
Tensile Stress
       
Break, 73°F
--
psi
ISO 527-2/5
Ultimate
--
psi
ASTM D638
Tensile Elongation
       
Break
--
%
ASTM D638
Break, 73°F
--
%
ISO 527-2/5
Flexural Modulus
--
psi
ASTM D790
Impact
Dry
Conditioned
Unit
Test Method
Notched Izod Impact Strength (73°F)
--
ft·lb/in²
ISO 180/1A
Hardness
Dry
Conditioned
Unit
Test Method
Rockwell Hardness
       
R-Scale
--
 
ASTM D785
R-Scale, 73°F
--
 
ISO 2039-2
Thermal
Dry
Conditioned
Unit
Test Method
Heat Deflection Temperature
       
66 psi, Unannealed
--
°F
ISO 75-2/B
264 psi, Unannealed
--
°F
ISO 75-2/A
Vicat Softening Temperature
--
°F
ISO 306/B50
Melting Temperature
--
°F
 
Electrical
Dry
Conditioned
Unit
Test Method
Surface Resistivity
       
--
--
ohms
ASTM D257
--
--
ohms
IEC 60093
Volume Resistivity
       
--
--
ohm·cm
ASTM D257
--
--
ohm·cm
IEC 60093
Flammability
Dry
Conditioned
Unit
Test Method
Flame Rating - UL (0.0315 in)
--
 
UL 94
Glow Wire Ignition Temperature (0.0787 in)
--
°F
IEC 60695-2-13
Related Terminology
Dry
Product names can be difficult to match. You may have searched any one of these terms to find this product: AQUAMID 66G30, AQUAMID , AQUAMID66G30, 66 G 30, 66G30, 66G, G30, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Aquafil, Polyamide66, Nylon66, G66
Generic Name
Dry
Generic Name may also be described by the following terms: PA66.
Conditioned
Product names can be difficult to match. You may have searched any one of these terms to find this product: AQUAMID 66G30, AQUAMID , AQUAMID66G30, 66 G 30, 66G30, 66G, G30, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Aquafil, Polyamide66, Nylon66, G66

Generic Name may also be described by the following terms: PA66.
Injection
Dry
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Suggested Max Moisture
%
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Back Pressure
psi
 
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.