Arnite AV2 370 /B DSM EP Polyethylene Terephthalate (Glass Fiber Reinforcement, 35%)

Product Description

35% Glass Reinforced, brake booster body valves

General

Material Status

Commercial: Active

Availability

Asia Pacific

Europe

Filler / Reinforcement

Glass Fiber Reinforcement, 35% Filler by Weight

Additive

Mold Release

Uses

Automotive Applications

Valves/Valve Parts

RoHS Compliance

Forms

Pellets

Processing Method

Injection Molding

Multi-Point Data

Isochronous Stress vs. Strain (ISO 11403-1)

Isothermal Stress vs. Strain (ISO 11403-1)

Secant Modulus vs. Strain (ISO 11403-1)

Shear Modulus vs. Temperature (ISO 11403-1)

Specific Volume vs Temperature (ISO 11403-2)

Viscosity vs. Shear Rate (ISO 11403-2)

Physical	Nominal Value	Unit	Test Method
Density
--		g/cm³	ISO 1183
--		lb/in³	ISO 1183²
Water Absorption
Saturation, 73°F		%	ISO 62
Saturation		%	ISO 62²
Equilibrium, 73°F, 50% RH		%	ISO 62
Equilibrium		%	ISO 62²
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2
Tensile Stress (Break)		psi	ISO 527-2
Tensile Strain (Break)		%	ISO 527-2
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength
-22°F		ft·lb/in²	ISO 179/1eA
73°F		ft·lb/in²	ISO 179/1eA
-22°F		ft·lb/in²	ISO 179/1eA²
73°F		ft·lb/in²	ISO 179/1eA²
Charpy Unnotched Impact Strength
-22°F		ft·lb/in²	ISO 179/1eU
73°F		ft·lb/in²	ISO 179/1eU
-22°F		ft·lb/in²	ISO 179/1eU²
73°F		ft·lb/in²	ISO 179/1eU²
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/B
66 psi		°F	ISO 75-2²
264 psi, Unannealed		°F	ISO 75-2/A
264 psi		°F	ISO 75-2²
Melting Temperature³		°F	ISO 11357-3²
CLTE
Flow		in/in/°F	ISO 11359-2
Flow		in/in/°F	ISO 11359-2²
Transverse		in/in/°F	ISO 11359-2
Transverse		in/in/°F	ISO 11359-2²
Electrical	Nominal Value	Unit	Test Method
Surface resistivity		ohms	IEC 60093²
Volume Resistivity
--		ohm·cm	IEC 60093
--		ohm·in	IEC 60093²
Relative Permittivity			IEC 60250
100 Hz
1 MHz
Dissipation Factor			IEC 60250
100 Hz
1 MHz
Comparative Tracking Index
--		V	IEC 60112
--			IEC 60112²
Electric Strength		V/mil	IEC 60243-1
Flammability	Nominal Value	Unit	Test Method
Burning Behav. at 1.6mm nom. thickn. (0.06 in, UL)			ISO 1210²
Burning Behav. at thickness h (0.0295 in, UL)			ISO 1210²
Flammability Classification			IEC 60695-11-10, -20
0.0295 in
0.0591 in
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Arnite® AV2 370 /B, Arnite AV2 370 B, Arnite® , Arnite, ArniteAV2370B, AV 2 370, AV2 370, AV 2 370 B, AV2370, AV2 370 /B, AV2 370 B, AV2 370 :B, AV2 370 +B, AV2 370 -B, AV2 370 _B, AV2 370 B, AV2, 2370, 370B, AV2370B, AV2370_B, Polyethylene Terephthalate, PET, Polyester, DSM EP, PolyethyleneTerephthalate, 2AV
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector, Valves, Valve Parts.

Injection	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Suggested Max Moisture		%
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Nozzle Temperature		°F
Processing (Melt) Temp		°F
Mold Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

²Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.

³18 °F/min

Arnite® AV2 370 /B

Polyethylene Terephthalate

Glass Fiber Reinforcement, 35%

Supplied by DSM Engineering Plastics