IDES Prospector Already have an account? Login Here

IDES

Hytrel® 6359FG NC010

THERMOPLASTIC POLYESTER ELASTOMER

Supplied by DuPont Performance Polymers

The technical datasheet with complete property values for Hytrel® 6359FG NC010 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Hytrel® 6359FG is a medium modulus Hytrel® grade with nominal durometer hardness of 63D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion. Food grade.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Uses 
  • Non-specific Food Applications
RoHS Compliance 
Appearance 
  • Natural Color
Processing Method 
  • Extrusion
  • Injection Molding
  
Part Marking Code (ISO 11469)
  • >TPC-ET<
Resin ID (ISO 1043)
  • TPC-ET
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Melt Volume-Flow Rate (MVR) (230°C/2.16 kg)
in³/10min
 ISO 1133
Water Absorption
     ISO 62
Saturation, 73°F
%
  
Equilibrium, 73°F, 50% RH
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
 ISO 527-2
Tensile Stress
     ISO 527-2/1BA
Yield, 73°F
psi
  
Break, 73°F
psi
  
Tensile Stress
     ISO 527-2/1BA
10% Strain: 73°F
psi
  
5% Strain: 73°F
psi
  
Tensile Strain
     ISO 527-2/1BA
Yield, 73°F
%
  
Break, 73°F
%
  
Nominal Tensile Strain at Break (73°F)
%
 ISO 527-2/1BA
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-40°F
ft·lb/in²
  
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Notched Izod Impact Strength
     ISO 180/1A
-40°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness
     ISO 868
Shore D
 
  
Shore D, 15 sec
 
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Brittleness Temperature
°F
 ISO 974
Melting Temperature 2
°F
 ISO 11357-3
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Hytrel® 6359FG NC010, Hytrel 6359FG NC010, Hytrel® , Hytrel, Hytrel6359FGNC010, 6359 FG NC 010, 6359FG NC010, 6359FG, FGNC, NC010, 6359FGNC010, Thermoplastic Copolyester Elastomer, TPC-ET, TPCET, TPC:ET, TPC/ET, TPC+ET, TPC_ET, TPC ET, Thermoplastic Elastomer, TPE, DuPont, ThermoplasticCopolyesterElastomer, ThermoplasticElastomer, FG6359
Uses
Uses may also be described by the following terms: Food Applications.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Melt Temperature, Optimum - Injection Molding
°F
  
Mold Temperature
°F
  
Mold Temperature, Optimum - Injection Molding
°F
  
Drying Recommended
 
  
Extrusion
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Extrusion Melt Temperature, Optimum
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
210°C/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.