IDES Prospector Already have an account? Login Here

IDES

Zytel® 101F NC010

NYLON RESIN

Supplied by DuPont Performance Polymers

The technical datasheet with complete property values for Zytel® 101F NC010 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Zytel® 101F NC010 is an internally lubricated polyamide 66 resin for injection molding. It was developed for fast cycles and high productivity.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Additive 
  • Lubricant
  • Mold Release
  
Features 
  • Fast Molding Cycle
  • Fatigue Resistant
  • Fuel Resistant
  • Good Chemical Resistance
  • Good Electrical Properties
  • Good Mold Release
  • Good Moldability
  • Good Processability
  • Good Wear Resistance
  • Grease Resistant
  • High Flow
  • Low Molecular Weight
  • Lubricated
  • Oil Resistant
  • Ultrasonic Weldable
Uses 
  • Appliance Components
  • Automotive Applications
  • Connectors
  • Electrical/Electronic Applications
  
RoHS Compliance 
Automotive Specifications 
  •  1
Appearance 
  • Natural Color
Processing Method 
  • Injection Molding
Multi-Point Data 
  • Isothermal Stress vs. Strain (ISO 11403-1)
  • Viscosity vs. Shear Rate (ISO 11403-2)
  
Part Marking Code (ISO 11469)
  • >PA66<
Resin ID (ISO 1043)
  • PA66
Physical
Dry
Conditioned
Unit
Test Method
Specific Gravity
        
--
--
 
 ASTM D792
--
--
g/cm³
 ISO 1183
Molding Shrinkage
        
Flow: 0.126 in
--
in/in
 Internal Method
Across Flow: 0.0787 in
--
%
 ISO 294-4
Flow: 0.0787 in
--
%
 ISO 294-4
Water Absorption
        
73°F, 24 hr
--
%
 ASTM D570
Saturation, 73°F
--
%
 ASTM D570, ISO 62
Equilibrium, 73°F, 50% RH
--
%
 ISO 62
Mechanical
Dry
Conditioned
Unit
Test Method
Tensile Modulus (73°F)
psi
 ISO 527-2
Tensile Strength
        
Yield, 73°F
--
psi
 ASTM D638
Yield, 73°F
psi
 ISO 527-2
73°F
psi
 ASTM D638
Tensile Elongation
        
Yield, 73°F
--
%
 ASTM D638
Yield, 73°F
%
 ISO 527-2
Break, 73°F
%
 ASTM D638
Break, 73°F
%
 ISO 527-2/50
Nominal Tensile Strain at Break (73°F)
%
 ISO 527-2
Tensile Creep Modulus
       ISO 899-1
1 hr
--
psi
  
1000 hr
--
psi
  
Flexural Modulus
        
-40°F
--
psi
 ASTM D790
73°F
psi
 ASTM D790
171°F
--
psi
 ASTM D790
250°F
--
psi
 ASTM D790
73°F
psi
 ISO 178
Impact
Dry
Conditioned
Unit
Test Method
Charpy Notched Impact Strength
       ISO 179/1eA
-40°F
--
ft·lb/in²
  
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Charpy Unnotched Impact Strength
       ISO 179/1eU
-22°F
 
  
73°F
 
  
Notched Izod Impact
        
-40°F
--
ft·lb/in
 ASTM D256
73°F
ft·lb/in
 ASTM D256
-40°F
--
ft·lb/in²
 ISO 180/1A
-22°F
ft·lb/in²
 ISO 180/1A
73°F
ft·lb/in²
 ISO 180/1A
Unnotched Izod Impact Strength
       ISO 180/1U
-22°F
--
ft·lb/in²
  
73°F
 
  
Hardness
Dry
Conditioned
Unit
Test Method
Rockwell Hardness
       ASTM D785
M-Scale
--
 
  
R-Scale
--
 
  
Thermal
Dry
Conditioned
Unit
Test Method
Deflection Temperature Under Load
        
66 psi, Unannealed
--
°F
 ASTM D648
66 psi, Unannealed
--
°F
 ISO 75-2/B
264 psi, Unannealed
--
°F
 ASTM D648
264 psi, Unannealed
--
°F
 ISO 75-2/A
Brittleness Temperature
°F
 ASTM D746
Glass Transition Temperature
--
°F
 ISO 11357-2
Melting Temperature
        
-- 3
--
°F
 ISO 11357-3
--
--
°F
 ASTM D3418
CLTE
       ASTM E831, ISO 11359-2
Flow: 73 to 131°F
--
in/in/°F
  
Transverse: 73 to 131°F
--
in/in/°F
  
Electrical
Dry
Conditioned
Unit
Test Method
Surface Resistivity
        
--
--
ohms
 ASTM D257
--
ohms
 IEC 60093
Volume Resistivity
        
73°F
--
ohm·cm
 ASTM D257
--
ohm·cm
 IEC 60093
Dielectric Strength
        
73°F, 0.0630 in 4
--
V/mil
 ASTM D149
73°F, 0.126 in 4
--
V/mil
 ASTM D149
73°F, 0.0394 in
V/mil
 IEC 60243-1
Dielectric Constant
        
73°F, 100 Hz
--
 
 ASTM D150
73°F, 1 kHz
--
 
 ASTM D150
73°F, 1 MHz
--
 
 ASTM D150
73°F, 100 Hz
 
 IEC 60250
73°F, 1 kHz
 
 IEC 60250
73°F, 1 MHz
 
 IEC 60250
Dissipation Factor
        
73°F, 100 Hz
--
 
 ASTM D150
73°F, 1 kHz
--
 
 ASTM D150
73°F, 1 MHz
--
 
 ASTM D150
73°F, 100 Hz
--
 
 IEC 60250
73°F, 1 kHz
 
 IEC 60250
73°F, 1 MHz
 
 IEC 60250
Flammability
Dry
Conditioned
Unit
Test Method
Flame Rating - UL
       UL 94
0.0157 in
--
 
  
0.0280 in
--
 
  
0.0591 in
--
 
  
0.118 in
--
 
  
0.236 in
--
 
  
Flammability Classification
       IEC 60695-11-10, -20
0.0157 in
--
 
  
0.0280 in
--
 
  
0.0591 in
--
 
  
0.118 in
--
 
  
0.236 in
--
 
  
Glow Wire Flammability Index
       IEC 60695-2-12
0.0157 in
--
°F
  
0.0280 in
--
°F
  
0.0591 in
--
°F
  
0.118 in
--
°F
  
Glow Wire Ignition Temperature
       IEC 60695-2-13
0.0157 in
--
°F
  
0.0280 in
--
°F
  
0.0591 in
--
°F
  
0.118 in
--
°F
  
Oxygen Index
--
%
 ISO 4589-2
UL
Dry
Conditioned
Unit
Test Method
RTI Str
       UL 746
0.0157 in
--
°F
  
0.0280 in
--
°F
  
0.0591 in
--
°F
  
0.118 in
--
°F
  
0.236 in
--
°F
  
RTI Imp
       UL 746
0.0157 in
--
°F
  
0.0280 in
--
°F
  
0.0591 in
--
°F
  
0.118 in
--
°F
  
0.236 in
--
°F
  
RTI Elec
       UL 746
0.0157 in
--
°F
  
0.0280 in
--
°F
  
0.0591 in
--
°F
  
0.118 in
--
°F
  
0.236 in
--
°F
  
Comparative Tracking Index (CTI) (0.118 in)
--
V
 UL 746
Comparative Tracking Index (CTI) (PLC) (0.118 in)
--
 
 UL 746
Related Terminology
Dry
Product names can be difficult to match. You may have searched any one of these terms to find this product: Zytel® 101F NC010, Zytel 101F NC010, Zytel® , Zytel, Zytel101FNC010, 101 F NC 010, 101F NC010, 101F, FNC, NC010, 101FNC010, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, DuPont, Polyamide66, Nylon66, F101
Generic Name
Dry
Generic Name may also be described by the following terms: PA66.
Conditioned
Generic Name may also be described by the following terms: PA66.
Features
Dry
Features may also be described by the following terms: Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle, Good Electrical Properties, High Flow, High Melt, High MFI, Good Chemical Resistance, Chemical Resistant, Good Mold Release, Easy Release, Good Demolding, Good Moldability, Low Molecular Weight, Low MW, Good Processability, Easy Processing, Good Wear Resistance, Wear Resistant, Ultrasonic Weldable.
Uses
Dry
Uses may also be described by the following terms: Appliance Components, Appliance Parts, Automotive Applications, Automotive Sector, Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector.
Automotive Specifications
Dry
This plastic material has approval for 8 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): ASTM (4), CHRYSLER (2), GM (1), FORD (1).
Conditioned
Product names can be difficult to match. You may have searched any one of these terms to find this product: Zytel® 101F NC010, Zytel 101F NC010, Zytel® , Zytel, Zytel101FNC010, 101 F NC 010, 101F NC010, 101F, FNC, NC010, 101FNC010, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, DuPont, Polyamide66, Nylon66, F101
Injection
Dry
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Processing (Melt) Temp
°F
  
Melt Temperature, Optimum
°F
  
Mold Temperature
°F
  
Mold Temperature, Optimum
°F
  
Drying Recommended
 
  
Notes
1This specification is applicable for the Americas region.
2Typical properties: these are not to be construed as specifications.
310°C/min
4Method A (Short-Time)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.