IDES Prospector Already have an account? Login Here

IDES

Panlite® AM-9022

Polycarbonate + PET

Supplied by Teijin Kasei America, Inc. (Teijin Chemicals)

The technical datasheet with complete property values for Panlite® AM-9022 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Features 
  • Good Chemical Resistance
  • Good Flow
  • Good Impact Resistance
  • Good Moldability
  • High Heat Resistance
Uses 
  • Automotive Applications
  • Handles
  
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Melt Volume-Flow Rate (MVR) (280°C/2.16 kg)
in³/10min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Stress (Yield)
psi
 ISO 527-2/50
Tensile Strain (Yield)
%
 ISO 527-2/50
Nominal Tensile Strain at Break
%
 ISO 527-2/50
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
 ISO 179
Charpy Unnotched Impact Strength
 
 ISO 179
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B50
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
 IEC 60093
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Panlite® AM-9022, Panlite AM9022, Panlite® , Panlite, PanliteAM9022, AM, AM-9022, AM9022, AM:9022, AM/9022, AM+9022, AM_9022, AM 9022, Polycarbonate + PET, Polycarbonate PET, Polycarbonate : PET, Polycarbonate / PET, Polycarbonate - PET, Polycarbonate _ PET, Polycarbonate PET, PC+PET, PCPET, PC:PET, PC/PET, PC-PET, PC_PET, PC PET, Polycarbonate, PC, pc+pbt, pcpbt, pc:pbt, pc/pbt, pc-pbt, pc_pbt, pc pbt, Teijin, PolycarbonatePET, Polycarbonate_PET, 9022AM
Features
Features may also be described by the following terms: Good Moldability, Good Impact Resistance, High Heat Resistance, Good Flow, Good Chemical Resistance, Chemical Resistant.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.